Electronics

  Board Replacement Decoder for Kato N-Scale Glacier Express 1.5 Amp/2.0 Amps Peak Motor Current Rating 6 FX3 Functions-500mA Function Current Rating

  Replaces DN163A2 Board Replacement Decoder for Atlas N Scale GP7, GP9 and GP15-1, GP30, GP35 and similar locos Decoder Lock equipped

 Fits Many N/HO Locomotives with 8 pin Medium Socket Size: .55” x .404” x .2” 13.9mm x 10.3mm x 5 mm N/HO Scale Digitrax Easy Connect 8 Pin Harness 1.0 Amp/1.5 Amps Peak 3 FX3 Functions, 0.5 Amp FX3 Function outputs for prototypical...

 Wired Motor & Function Decoder that fits many N and HO Scale Locos. Size: .55” x .404” x .2” 13.9mm x 10.3mm x 5 mm N/HO Scale 1.0 Amp/1.5 Amps Peak 3 FX3 Functions, 0.5 Amp FX3 Function outputs for prototypical lighting effects and...

  Digitrax LocoMotion™ System Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps...

 Digitrax 9 pin to DCC medium plug short harness (1”)

Dual 3/5/8 Amp AutoReversing DCC Booster Up to 16 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch setup Auto resetting over...

Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability) Up to 8 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch...

 The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state...

 AR1 Features: Cost effective automatic reversing for one reversing section or subdistrict User selectable trip current lets you adjust the AR1 to work with any scale or equipment on your layout Auto-Reversing manages polarity...

 Decoder Wire for decoder, lighting & signal installation 90ft 32AWG stranded wire-10 ft lengths in 9 colors

This Bowser - Stewart Speaker Enclosure is just the thing for adding sound in your Bowser, Atlas, Fox Valley and other diesels. Speaker enclosure comes with two 11x15mm, 8 Ohm impedance, sugar cube speakers installed with wire and plug. The speaker...

The Bachmann 16V DC Multi-Accessory Power Supply allows you to power up to six powered accessories up to a one-amp load (instruction included with most accessories tell how much current they use in milliamps). Connect as many as three accessories such as...

A handy small electrical hookup conector designed for tight spaces. For #18-22 wire and #3 screw post. Maximum width is .218" (24 pieces per pkg.) Atlas Spade Connectors #3 (24)

Athearn Dual Cube Speaker Assembly

Breakout board for the Digitrax PM42 board The PM42 breakout board is setup to accept up to 2 inputs and 4 distinct outputs. Each output can be configured with jumpers to make it a reversing section. The board comes with one set of jumpers that allows...

The multiple input breakout board for the BDL168 block detection eliminates soldering connections to the card edge or card edge adapter of this product. This design has 4 inputs separate inputs, each tied to a specific detection zone; each zone has 4...

Note: designed for use with Tortoise(TM) switch machines manufactured before May/June 2020 that feature a tan 1-19/64" (33mm) wide PC board. See ACL10001 for updated version SNAPS! is a new product that we have developed and manufactured in-house here at...

 Note: designed for use with Tortoise(TM) switch machines manufactured before May/June 2020 that feature a tan 1-19/64" (33mm) wide PC board. See ACL10001 for updated version SNAPS! is a new product that we have developed and manufactured in-house...

Note: designed for use with Tortoise(TM) switch machines manufactured before May/June 2020 that feature a tan 1-19/64" (33mm) wide PC board. See ACL10001 for updated version SNAPS! is a new product that we have developed and manufactured in-house here at...