Electronics

The CN-GP is a N-scale drop-in decoder for Atlas, Kato, and Life Like locomotives. Examples include the following:   Atlas: GP7/GP9 GP30/GP40/GP60   Kato: SD40   Life Like: GP18 GP60   See the Installations Page for a full list...

 The DT602 Advanced super throttle gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand.  Available in standard tethered or Radio Duplex.   The DT602 is...

Finally… a camera for N-Scale!! Climb into the Cab and experience your layout with a Choo Choo Vision Model Railroad CAB-CAM.  View your layout in real-time from the Engineer’s point-of-view — A realistic and immersive experience...

HO-scale, 4-function decoder that measures 74 x 17 x 3mm designed to replace the existing manufacturer light board in Atlas HO diesel models, some InterMountain Railway models, and those using a similar physical design. This decoder will operate in both...

HO-scale, 4-function decoder that measures 25.1 x 15.6 x 4.7mm. This decoder has a 21-pin connector arranged according to the NMRA Standard that easily plugs into the factory-installed PCB of many models. This decoder will operate in DCC...

RJ12 cable with a length of 2 feet. For use with DCC systems such as Digitrax LocoNet.

DCC Main Bus Wire, (Black), 14AWG, 50 Feet NCE Multi Scale DCC Main Bus Wire Black 50'

Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability) Up to 8 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch...

  Eight 9G servo decoder for 2-position Slow-motion turnouts. Configurable to control eight 3-position semaphores. Works with compatible LocoNet Systems. Plug and play connections. Option setup switches for configuration. On-layout...

 The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications.  There has also been interest in HOn3 and S-Gauge applications. 

Add this USB computer interface for computer programming and/or operation of your Power Cab equipped layout. Requires USB cable, computer and railroad computer program such as JMRI Decoder Pro and Panel Pro

Our newest speaker is the Mini Cube 3. We just love the amazing sound that you can get out of this tiny speaker. The Mini Cube 3 is only 12 x 5.5 x 3mm, but the sound it produces will blow your mind!  George has shown this speaker off in YouTube...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. Newly-redesigned at half the size of a KA4, the KA2 will power HO or N scale locomotives with approximately...

With its unique design LokSound 5 DCC Direct, with integrated PowerPack can easily replace boards that provide poor motor control, low volume, or generally inferior sound. Not only will the decoder work fine with most factory installed speakers, but it...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. Newly-redesigned and coming in at half the size of a KA3, the KA1 will power HO or N scale locomotives...

The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any...

Fits Many Z, N and HO Locomotives with 6 Pin NEM 651 type plug Size: .36” x .42” x .13”9.05mm x 10.61mm x 2.67mm N Scale 1.0 Amp/1.5 Amps Peak 2 FX3 Functions, 0.5 Amp with 6 Pin NEM 651 type plug   FX3 Function...

This snap-together baffle kit is designed for use with our 28mm round speakers (P.N. 810054 or 810153).

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

1k ohm resistors The Decoder Buddy was developed for the 8 output decoders. This mother board does not include the 21-Pin Decoder. This mother board requires soldering. This printed circuit board is NOT INTENDED FOR USE IN A DC SYSTEM.  However, if...