Electronics

Tech 7 ampac 780 features two independent Tech 7 units in one housing. It is designed to control two trains in different blocks with common rail. This dual unit not only has a total output of 20VA, but features that include revolutionary slow speed...

This harness easily converts TSU-2200 or ECO-200 Digital Sound Decoders to plug and play decoders for use with models equipped with an NMRA 8-pin socket.

The Bachmann 16V DC Multi-Accessory Power Supply allows you to power up to six powered accessories up to a one-amp load (instruction included with most accessories tell how much current they use in milliamps). Connect as many as three accessories such as...

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 For Kato N P42 and similar 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output 8 Ohm 13mm round Speaker 100uF Capacitor

Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin "Quick Plug" to improve performance over dirty track and switches.

All the great features and reliability of Digitrax decoders in a tiny package that will fit almost anywhere! 0.55" x 0.28" x 0.128" (14 x 7.13 x 3.25 mm) Works with Z, N, and HO scale locos 1 Amp/1.25 Amps Peak Motor Current Rating Digitrax...

The DBX-9000 is a compact 9-wire connector and harness assembly for use with universal-style DCC decoders. It is designed to simplify the wiring connection between a steam locomotive and its tender, providing a quick-disconnect for...

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and PS-Harness 1.0 Amp/2 Amps Peak 2 FX7 Functions, 200ma Output

Thin cables Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we...

With the LokSound 5 Nano DCC, ESU has succeeded in developing an even smaller LokSound decoder! Thus, it should really be used in all vehicles of nominal sizes N and TT.   The LokSound 5 Nano DCC with E24 interface has a size of 19.6mm x 8.5mm...

Decoder Buddy from Nix Trainz is a 21-pin-friendly replacement motherboard for the standard factory-supplied DCC 8-pin loco motherboard in many locomotives. It allows you to take full advantage of all the functions and features of the latest decoders...

Alligator clips are versatile, durable, and easy-to-use tools for establishing temporary electrical connections in electronics and DIY projects. Their hinged jaws make them widely applicable, including in airbrushing setups, where they can securely grip...

Build your control panels with greatly simplified wiring. Just connect push buttons to the Mini Panel and use to issue turnout routing macros, individual turnout commands by pushing one button. Set up is easy, just plug in a Pro Cab (sold separately) and...

DCC Mono Frog Juicer (polarity reverser for frogs)For all DCC systems including NCE PowerCab.  This board is an automatic polarity reverser for a single frog.  Setup is simple, connect two wires to the DCC bus and one wire to a frog.  The...

Ready to install in compatible locomotive motherboards 26.5mm X 15.5mm X 9mm Rated at 8 Ohm Rated at 1/2 Watt  

SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather...

The K7D4 is a 4-function N-scale drop-in decoder designed to fit Kato locomotives. Examples include the following: Kato: ACS-64 EMD SPD40F Ge 4/4 II and III "Glacier Express" See the installation pages for a full list of compatible engines! ...

The multiple input breakout board for the BDL168 block detection eliminates soldering connections to the card edge or card edge adapter of this product. This design has 4 inputs separate inputs, each tied to a specific detection zone; each zone has 4...

 The LokSound 5 micro DCC Direct has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can...

Dual 3/5/8 Amp AutoReversing DCC Booster Up to 16 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch setup Auto resetting over...