DCC Accessories

16V 4.5A Power Supply for Track Power Use16V 4.5A 72W switching power supply - best for track power.  Delivers about 15 V to track when used with our booster above.  Plug size is 5.5/2.1 mm. Power supply comes with a US 110V plug.  By...

5 Amp Trip / 3 A Continuous Duty DCC Booster BoardDCC Booster board without the power supply.  These boards can be used to make locomotive Power Districts or an Accessory District with a shared power supply.  A jumper is used to set...

DCC Mono Frog Juicer (polarity reverser for frogs)For all DCC systems including NCE PowerCab.  This board is an automatic polarity reverser for a single frog.  Setup is simple, connect two wires to the DCC bus and one wire to a frog.  The...

DCC Circuit Breaker Perfect Protection for your Frog Juicers!This is the same board as the Dual Frog Juicer but confugured to work as a circuit breaker.  When there is a short it will cut off both rails at once.  This solves some...

DCC Dual Frog Juicer and Auto-ReverserFor all DCC systems including NCE PowerCab.  This board can be configured to use as an automatic polarity reverser for two frogs, a reversing loop, a turntable, a wye, or a crossing.  It uses the same...

DCC Hex Frog Juicer - power 6 frogsFor DCC systems 2 Amps to 8 Amps including NCE PowerCab.  This board can be configured to use as an automatic polarity reverser for six frogs, or a reverser for one to three reversing loops, turntables, wyes,...

LocoNet Universal Panel and 3 Amp Z Scale Voltage Reducer 6 LocoNet Jacks for use with all scales Reduces track voltage by 4 or 6 volts at 3 amps for safer Z Scale locomotive operation with Digitrax equipment

Prodigy Advanced & Tech 6 Extension Plate and CablesAllows user to extend the range of two handhelds by more than 9 feet. Plug-in port for mounting around your layout All Cables include RJ45 connectors - Plug and Play Ready for mounting - Screws...

EXPAND: Expand your Prodigy DCC layout with a 0001415 Handheld Controller. For use with Prodigy Elite, Prodigy Advanced 2, Prodigy Advance, Prodigy Express2 or Prodigy Express. The 0001415 Handheld features LCD display screen with quick readout. It...

Decoder for head and tail lights The decoder "FL12" that controls the headlights and taillights is equipped with a dimming function. Headlights that used to emit light with MAX power can be dimmed.

Decoder Buddy from Nix Trainz is a 21-pin-friendly replacement motherboard for the standard factory-supplied DCC 8-pin loco motherboard in many locomotives. It allows you to take full advantage of all the functions and features of the latest decoders...

A 10 foot (120in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

A 7 foot (84in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

A 1 foot (60in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

A 1 foot (36in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

A 1 foot (12in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

 RJ12 cable with a length of 6 feet. For use with DCC systems such as Digitrax LocoNet. 

With our small relay, loads are controllable whose draw exceeds the decoder’s function output. Put the relay between output and load.

2-wire stay alive device compatible with Tsunami2 and TCS decoders.

The new ESU PowerPack Mini can be wired to all fourth and fifth generation ESU decoders. It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders. With its energy storage (1 Farad capacity) the unit supplies...