DCC Accessories

Simplifies hookup, maintenance and troubleshooting of LocoNet. All connections plug-detachable. One RJ12 Throttle Jacks in front panel. IR and NET Indicator LEDs Two RJ12 LocoNet Jacks in rear for connection to other LocoNet devices.Use with 6 conductor...

All plug-in connectors for simple and easy installation and service. User defined as 16 DS reporting addresses in 1 to 2000+ DS range. Easy setup with device Option Switches (OPSW) Powered by 2mm DC jack, 8V min to 22V max. Configured to operate with...

RJ12 cable with a length of 12 feet. For use with DCC systems such as Digitrax LocoNet.

Nickel-Metal Hydride 600mAH 3.6v Rechargeable Battery Pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no need to remove the battery cover. No battery “memory” effect. Works...

The RX4 is a 4 zone transponder detector for use with Digitrax occupancy detection systems.  The RX4 enables you to not only see what blocks are occupied but also identifies what is there. RX4 Features: Know the layout zone location of...

Lets you share decoders among locomotives 2” wires from Digitrax plug to DCC 8 pin plug Fits many HO locomotives with 8 pin socket

Lets you share decoders among locomotives 4” wires make it easy to install in N or HO 5-Pack

Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack)

Bracket will hold: DT602, UT6 and other legacy Digitrax throttles. Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day Warranty On Materials...

Bracket will hold: DT602, UT6 and other legacy Digitrax throttles. Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day Warranty On Materials...

Make programming your locomotives CV’s easier with Broadway Limited’s CV Setter! Designed for precision and ease of use, this essential tool allows you to quickly and simply customize and fine-tune the performance of your locomotives to meet...

The Analog Filter 1 (AF1) is used to filter the DC signal leaving the power pack. This filter pack corrects flickering in lighting effects and low-speed auto-reversing. Only one AF1 is required to smooth out the operation of all of the locomotives being...

This product is used with the LT-50 "Layout Throttle." This panel can be used to create a DCC track output when used with an LT-50 using the specified jack. A single additional wired LCC throttle can be connected to the front of the panel, and this...

The BA-100 “Booster Adapter” is a product which can be used to connect different manufacturers’ DCC boosters (and command stations) together. This product is intended to offer a quick and easy way to “plug and play”...

NOTE: This product utilizes a specific plug harness which may not be compatible with all decoders. TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work...

NOTE: This product utilizes a specific plug harness which may not be compatible with all decoders. TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work...

NOTE: This product utilizes a specific plug harness which may not be compatible with all decoders. TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work...

NOTE: This product utilizes a specific plug harness which may not be compatible with all decoders. TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. This...

This custom-designed holder can hold a single TCS UWT-100 throttle. Includes: 1 - 3D printed holder designed perfectly for the UWT-100 1 - Bag of 2 Screws

This custom-designed holder can hold a single TCS throttle such as the UWT-50, LT-50, or UWT-100! Includes: 1 - 3D printed holder designed perfectly for UWT50, LT-50, and UWT-100. 1 - Bag of 4 Screws