DCC Decoders

The LokPilot 5 Fx is a function decoder without motor output and therefore perfect for installation in control cars or function models. Because it talks DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common...

These units provide a direct plug-in to Athearn and other locos equipped with NMRA 8 pin DCC and include Silent Running torque-compensated motor drive for ultra smooth low speed performance. Motor rating 3/4 Amp continuous, 1.2 Amp stall. All four...

The K4-LK is a function-only lighting expansion board which has been designed to be installed into the KATO N-scale MP36PH. This board has three hookup wires - One RED Anode(+) wire (center) and two GREEN function wires(-). Simply solder the wires to...

This decoder is a T6 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a T-series decoder, but...

This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but...

This motherboard is designed to replace the existing circuit board in a Walthers Proto 2000 Heritage 0-6-0 and 0-8-0. This board is designed to receive a WOW121 or EU621 decoder and provides an onboard Keep Alive® for uninterrupted performance over...

This motherboard is designed to replace the existing circuit board in a Walthers Proto 2000 Heritage 0-6-0 and 0-8-0. This board is designed with High Profile Pins to receive a Soundraxx or ESU Decoder and provides an onboard Keep Alive® for...

This motherboard is designed to replace the existing circuit board in a Bachmann Light 4-8-2 (short tender) or the 2-8-0. This board provides an onboard Keep Alive® for uninterrupted performance over troublesome tracks. NOTE: This product does...

This board is designed with High Profile Pins to Receive a Soundtraxx or ESU decoder and provides an onboard Keep Alive® (KA4 style) for uninterrupted performance over troublesome tracks. This motherboard includes a rear LED light and onboard...

This motherboard is designed to replace the existing circuit board in a Bachmann Heavy 4-8-2. This board is designed to receive a WOW121 or EU621 decoder and provides an onboard Keep Alive® (KA2 style) for uninterrupted performance over...

This motherboard is designed to replace the existing circuit board in a Bachmann Heavy 4-8-2. This board is designed with High Profile Pins to Receive a Soundtraxx or ESU decoder and provides an onboard Keep Alive® (KA4 style) for...

This motherboard is designed to replace the existing circuit board in a Bachmann Baldwin J-Class 2-8-2. This board is designed to receive a WOW121 or EU821 decoder and provides an onboard Keep Alive® (KA4 style) for uninterrupted...

This motherboard is designed to replace the existing circuit board in a Bachmann Richmond 4-4-0. This board is designed to receive a WOW121 or EU621 decoder and provides an onboard KA2 and a 21-pin connector for quick decoder installation. The B-MB4 is...

This motherboard is designed to replace the existing circuit board in a Bachmann Baldwin J-Class 2-8-2. It has an onboard Keep Alive® (KA4 style) for uninterrupted performance over troublesome tracks.  This board is designed with High Profile...

This motherboard is designed to replace the original lighting board in Bachmann steam engines including the K4 steam. Included on this motherboard is a KA3 Keep Alive® for smooth operation over troublesome tracks. Pair with a WOW121 for...

This motherboard is designed to replace the original lighting board in Bachmann steam engines including the 4-6-0. Included on this motherboard is a KA3 Keep Alive® for smooth operation over troublesome tracks. This board is designed with High...

This motherboard is designed to replace the original lighting board in Bachmann steam engines including the 4-6-0. Included on this motherboard is a KA3 Keep Alive® for smooth operation over troublesome tracks. Pair with a WOW121 for unparalleled...

This motherboard is designed to replace the original lighting board in Bachmann steam engines including the 4-6-0. Included on this motherboard is a KA3 Keep Alive® for smooth operation over troublesome tracks. This board is designed with High...

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot...