DCC Decoders

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use...

Never wire another resistor for 1.5v bulbs! The VR1.5 can be used with any decoder to supply a 1.5V regulated supply for all of your light bulbs.   To use the VR1.5, connect the Blue wire to the 12V power supply from your decoder (BLUE), and...

The IMF4 is a N-scale drop-in decoder which is designed for InterMountain F-unit locomotives. Examples include the following: InterMountain: F3A/B F7A/B F9B See the installation pages for a full list of compatible engines! NOTE: This version of...

This M1 decoder (see M1 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug. From M1 listing 1006 The M1 is a small form factor hard-wire decoder with 2 lighting functions for HO-scale...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The WAUX-KA4 will power an HO-Scale locomotive with headlights on for approximately 6 to 20 seconds...

The IMD4 is a N-scale drop-in decoder which is designed for InterMountain locomotives. Examples include the following: InterMountain: SD40-2W See the installation pages for a full list of compatible engines! Back EMF Load...

Fits Intermountain N Scale FP7A with wired motors produced after Jan 2014 6 FX3 Functions 472” x 2.165” x .098”11.98mm x 54.99mm x 2.4mm   ▪FX3 Function outputs for prototypical lighting effects and on/off...

Fits Kato FP40-PH or compatible HO locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output 8 Ohm 28 mm round speaker w/330uF Capacitor

The LokPilot 5 Fx DCC is a function decoder without motor output and is therefore perfect for installation in control cars or function models. As the "twin brother" of the LokPilot 5 Fx, it shares its characteristics and also the basic...

The LokPilot 5 Fx DCC is a function decoder without motor output and is therefore perfect for installation in control cars or function models. As the "twin brother" of the LokPilot 5 Fx, it shares its characteristics and also the basic...

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. LokPilot 5 decoders are offered with all common interfaces. Modes The LokPilot 5 is a real...

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it...

he BLU-1100 is the newest addition to the SoundTraxx Blunami line, offering all the great features you love—now in a compact, versatile format. With wireless control through the free Blunami App, you can run trains, adjust settings, and...

Our Blunami decoders will change the way you enjoy the model railroading hobby. They operate in DC, DCC, or wireless mode with the free Blunami App. The Blunami BLU-21PNEM8The BLU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is...

he BLU-1100 is the newest addition to the SoundTraxx Blunami line, offering all the great features you love—now in a compact, versatile format. With wireless control through the free Blunami App, you can run trains, adjust settings, and...

The CN is a N-scale drop-in decoder for older Atlas, Kato, and Intermountain locomotives. Examples include the following: Atlas: GP7/GP9 Old Style GP30/GP35 Old Style SD35/SD50/SD60/SD60M B30-7/B40-8 GP38 GP40 DCC-Ready SD9...

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug. From M4 listing 1011 Back EMF Load Compensation: Provides superior slow speed control and high performance...

The K4D6 is a N-scale drop-in decoder specifically designed to fit the Kato N-Scale MP36PH locomotive. This decoder is also commonly paired with the K4-LK lighting kit for the MP36PH. Note: The K4D6 does not have the copper...

The T1 LED has added Blue and Black/White wires for the use of a KeepAlive device. This decoder has internal resistors for LEDs eliminating the use of external resistors for F0F or F0R. This decoder may be hard-wired or plugged directly into any...