DCC Decoders

 The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All...

With its unique design the LokSound 5 Direct DCC can easily replaceboards that provide poor motor control, low volume, or generally inferiorsound. Not only will the decoder work fine with most factory installedspeakers, but it will sound even better with...

  LokSound 5 micro DCC "blank decoder", 8-pin NEM652, gauge: N, TT, H0   The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit...

 The LokSound 5 micro DCC Direct has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can...

 The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into...

Decoder tester (Replaces 51900), NEM651, NEM652, 21MTC, PluX22, Next18, single wires. With motor, LED-Monitor and 20mm speaker. New socket to accept decoder tester extension 53901Â Perhaps you are familiar with this scenario: there is a digital decoder...

Fits Many DCC-Ready Z, N and HO Scale Locomotives Size: .55” x .4” x .148”14mm x 10.23mm x 3.77mm Z/N/HO Scale 1.0 Amp/1.5 Amps Peak 4 FX3 Functions, 0.5 Amp DCC Medium Plug with 1 ‘ Harness   FX3 Function...

All the great features and reliability of Digitrax decoders in a tiny package that will fit almost anywhere! 0.55" x 0.28" x 0.128" (14 x 7.13 x 3.25 mm) Works with Z, N, and HO scale locos 1 Amp/1.25 Amps Peak Motor Current Rating Digitrax...

Fits Many Z, N and HO Scale Locomotives Size: .455” x .369” x .126”11.56mm x 9.37mm x 3.2mm Z, N and HO Scale 1.0 Amp/1.5 Amps Peak 2 FX3 Functions, 0.5 Amp DCC Medium Plug with 1 ‘ Harness FX3 Function outputs for...

Fits Many Z, N and HO Locomotives with 6 Pin NEM 651 type plug Size: .36” x .42” x .13”9.05mm x 10.61mm x 2.67mm N Scale 1.0 Amp/1.5 Amps Peak 2 FX3 Functions, 0.5 Amp with 6 Pin NEM 651 type plug   FX3 Function...

Digitrax LocoMotion® SystemYour locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!   Torque Compensation for smooth as silk silent operation. 128 Speed Step operation...

Fits New InterMountain N Scale SD40-2 released 2017 1.5 Amp/2 Amp Peak 6 FX3 Functions, 0.5 Amp .329” x 2.603” x .065”8.36mm x 66.11mm x 1.64mm

 Features: Board replacement decoder for MicroTrains FT. Golden-White LEDs for added realism Decoder Lock equipped

 Board Replacement Decoder for Walthers Proto GP20 and similar locos 

  Board Replacement Decoder for Kato N-Scale Glacier Express 1.5 Amp/2.0 Amps Peak Motor Current Rating 6 FX3 Functions-500mA Function Current Rating

  Replaces DN163A2 Board Replacement Decoder for Atlas N Scale GP7, GP9 and GP15-1, GP30, GP35 and similar locos Decoder Lock equipped

 Wired Motor & Function Decoder that fits many N and HO Scale Locos. Size: .55” x .404” x .2” 13.9mm x 10.3mm x 5 mm N/HO Scale 1.0 Amp/1.5 Amps Peak 3 FX3 Functions, 0.5 Amp FX3 Function outputs for prototypical lighting effects and...

  Digitrax LocoMotion™ System Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps...