HO Scale

HO, N BrightBoy Track Cleaner, small

Rail Joiners Code 83 Insulated 12 pcs

Rail Joiners Code 70 Insulated 12 pcs

Click here for a detailed tutorial and explanation of Magnorail: https://www.magnorail.com/en/tutorial/     Magnet viewer to locate the magnets in the Magnorail chain through the road surface. Very useful, Magnet viewer is an essential...

Click here for a detailed tutorial and explanation of Magnorail: https://www.magnorail.com/en/tutorial/    60 cm of flexible track with blue chains

Code 70 Slip-on Nickel Silver Rail Joiners (50)

Set-up is easy: all connections to the SmartSwitch board simply plug together or attache to screw terminal blocks. Programming is easily done using the detachable servo programming board, and full, plain-English instructions are included with each set.

Used to weather nickel silver or brass track, rail, or rail joiners to match Micro Engineering Weathered Flex-Track and nickel silver weathered rail.

The Atlas Under-Table Switch Machine is an under-table design for use with right or left hand turnouts. For use with Atlas HO and N Scale turnouts.

A Fine-Grit Abrasive Block for Track & Electrical Contacts If you're looking for a mildly abrasive cleaning block for track and electrical contacts that minimizes scarring of your metal surfaces, this is it. This soft abrasive Bright Boy cleaner is...

Show off your patriotism with Old Glory waving in the wind. US Flag - Poles are available in three sizes and work for multiple scales. They feature a United States flag high on a flag pole. The pole is topped with a ball-style finial and includes a rope...

For DCC Operation The Walthers Cornerstone Turntable Advanced Control Module makes it possible to operate your Motorized Turntable using DCC, serial UART, keypad or switch contacts. For DCC applications this circuit will function as a stationary decoder...

800mA, 16V DC Output Power your Walthers Cornerstone HO or N Scale Turntables (sold separately) quickly and easily with this plug-in wall unit featuring: Installs in minutes - instructions included Independent 800 ma 16VDC filtered power supply Includes...

3 SPST On/Off Switches in Parellel The Atlas Connector is a panel with three on-off switches for track sections (blocks) or accessories. It has three SPST (single-pole, single-pole) on-off switches in parallel. Use to control power to sidings,...

  For use with all solenoid motors (e.g. PL-10 and Pl-11). Connect this unit to the 16v ac supply on your transformer. The capacitor stores up power and discharges a 'kick' to ensure turnout blades 'snap over' every time. PL-10 Turnout Motors ...

 This fits directly to the PL-10 family of Turnout Motors. The 2 single pole changeover switches can be used to control polarity, route selection diagrams, or 2 aspect colour light signalling etc. Rated 16v 2amps (continuous) or 2.5amps (momentary)...

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these switches without soldering; the included Shrouds prevent...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts with this five-pack of Switch Machines! The Layout Control System is expandable at any time to grow with your layout, and can be...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts with this five-pack of Switch Machines! The Layout Control System is expandable at any time to grow with your layout, and can be...

Double unit loco lift. Designed as a replacement for the old SL-43 Loco Lift, this new versatile system still has the features that made the SL-43 so popular, such as the ability to directly drive the locomotive on and off the track. But that was limited...