HO Scale

Developed in the mid 1960’s by John B. Rogers, and produced by the Super Company of Ft. Worth, Texas.  These were sold as lifting style spark arrestors.  Inside of the sheet metal housing, was a movable, chain mail like mesh.  ...

Developed in the mid 1960’s by John B. Rogers, and produced by the Super Company of Ft. Worth, Texas.  These were sold as lifting style spark arrestors.  Inside of the sheet metal housing, was a movable, chain mail like mesh.  ...

A unique, octagonal style exhaust stack fabricated by the Illinois Central and included on several of their rebuilt projects. Includes 1 pair of stacks.

A commonly overlooked detail, but one featured on every 1st generation locomotive, is the water filler pipe on the roof.  We have 3 styles of 100% scale water fill pipes.  3x are 2 ½” pipe: A basic capped pipe, a piped cap...

The EMD hood mounted bell was utilized by numerous railroads, starting around GP30 production. Our kit includes the bracket, which has an inner channel so it can be firmly attached to the shell using a piece of wire (included), two bells, as well as the...

Likely the most common style of bell used on EMD locomotives is the basic frame mounted bell.  The bell is attached to a simple “U” shaped piece of steel.  A small notch is provided on one side of the mount so it can be attached...

This is the first of several bell kits we will be introducing over the next few months.  This bell was used from the SW1 through SW1200 switchers.  There are two brackets included, one with an air line bracket, and one without.   Our...

This is a very basic light, with a rounded top to match the profile of the bulb.  Illinois Central and lots of midwest shortlines used this style of ditch light.  Like our other ditch lights, these come cored with a mount to fit an 0402 LED, as...

Smaller, Sinclair 450 Excaliber EOT Antenna. Includes 8 unpainted antennas.

Newer style of Sinclair antenna.  Has a “T” cross section.  Introduced in the mid 1960’s, still used today on many locomotives.   Includes 3 unpainted antennas. 

Older, tall style of Sinclair Excaliber Antenna.  Introduced in the mid 1950’s, and used on locomotives built through the 1960’s.   Includes 3 unpainted antennas.

Introducing our 100% scale, round cab vents.   These were common on numerous styles of locomotive from the 1950’s and on.  Installation is easy, as they have a 1mm mounting stem.  8 per pack including 4 “closed” and...

Burlington Northern “Medium” stacks.  This is an in-between height stack used on certain Burlington Northern GP9 rebuilds.  Unfortunately, I do not have any specifics on every engine these were used on.  Two per pack.

Union Pacific/Northern Pacific “Tall” stacks.  These 24” tall stacks were used on UP’s GP/SD7’s and NP GP9’s that were assigned to the Camas Prairie, which held large spark arrestors (not included) during summer...

“Universal” style light. A lesser common type, more of a thinner profile, with external screw mounts.  A lot of rebuilders used this style of light.  These lights are cored, with a mount inside for a 0402 (Pico size if you like...

This is the most common type of ditch light, and uses the basic Pyle rounded bulb mount (same as their headlight) on a thin base.   These lights are cored, with a mount inside for a 0402 (Pico size if you like Evans Designs) LED (not included)...

A basic sheet metal duct that covers the water line that returns the hot water cab heat back into the cooling loop mounted to the hood on top of the field shunting relay box.  This has never been offered as a stand-alone detail part before and is...

Rebuilt roof access doors to aid in power assembly removal. Hinged style, common to Illinois Central, Louisville & Nashville as well as others. Includes 4 doors.

Rebuilt roof access doors to aid in power assembly removal. Bolted style, common to Rock Island, C&NW, as well as others. Includes 4 doors.

1st Generation GP Sand Fillers. Includes 3 styles:– Journal Box Lid, GP7-GP9 (2x)– Journal Box Lid w/ Handle, GP7-9 (2x)– Flat Plate Style, Late GP9, GP18, GP20, GP30 (2x) Part is designed as a drop in fit for the newer Wathers Proto...