HO Scale

This is the second version of this 1950’s era streamlined engine that we offer; however, this kit includes everything required to build a small municipal powerplant, or industrial powerhouse.  Several of these engines are still around today...

Stationary & marine engine built from 1949-1957.  This was a common small municipal engine of the period, used for pumping, power generation as well as a marine propulsion engine.  This was one of the smaller FM -non opposed piston engines...

Common on modern day freight cars are these small GPS trackers.  These little boxes (one per car) are common on truck bolsters, covered hopper end sheets, gondola sides, etc.   Kit includes 6 each of 3 styles: truck mounted, bracket...

Designed to fit on the new run of Walthers Russell Snowplows (will likely also work with the older kit version) with some modifications.   Includes the striker, stand, cut lever brackets and .010″ wire.   Requires a modified...

Charcoal heater box that was commonly slung on the underside of reefers.  Includes the liquidometer gauges as well. Includes 2 heater boxes and 2 liquidometers.

An oddball of a headlight, used by Reserve Mining’s pair of EMD SW1200’s (later E&LS) as well as Oliver Iron Mining’s TR-6’s. This kit includes the extended height headlight bracket designed to fit onto the Walthers/Proto shell, as well as a pair of...

Mars twin beam headlight, which uses a single glass lens. Includes 2 headlights, and 2 clear resin lens portions – enough for one locomotive.  This part was designed with two mounting pins to drop on to the newer Walthers Proto GP7/9 shell...

Common from the 1960’s and on, our set includes 6 different styles. This is a fully scale part – they are small! Left-Right on the CAD image: – Small Modern style -Milwaukee Road (and other) Rectangular with conduit – GE...

This is a common vent used on numerous Alco S and RS engines, as well as some EMD switchers.  Includes 6 vents.

Also known as a crossover platform.  Midway through GP7 production GP7’s they changed to a fabricated bracket with a braced step, used through GP20’s.  Includes both “Dot Pattern” and “Diamond” pattern steps,...

Also known as a crossover platform.  Early production GP7’s used a stamped sheet metal bracket, and a step with no underside bracing.  Includes both “Dot Pattern” and “Diamond” pattern steps, in both raised and...

Common Pyle style ditch light, mounted to a basic bracket for mounting on top of pilots, anticlimbers, etc.  This style is used extensively by NS, UP and many others.  These lights are cored from the back, with a mount inside for a 0402...

This is the same box as the common 2 strap, with some differences. Some of the boxes that were retrofitted to equipment or changed around were mounted on a piece of notched out C channel (vs. the angle iron). Some Conrail GE’s utilized the front...

While widely known as -the- cab signal box used by Conrail and predecessors, this style of box was also used by Union Pacific, Burlington Northern and Illinois Central. Like the 3 strap, it is mounted on rubber isolators, which are in turn mounted to a...

A part synonymous with PRR (and later PC/CR) equipment is the 3-strap cab signal box. This is a huge box, applied to the front walkway that held the cab signal relays. These boxes are mounted on rubber isolators, which are in turn mounted to a piece of...

This box represents the ASC boxes applied to the LIRR MP15AC’s when delivered from EMD. In the late 1980’s, LIRR modified the boxes with an angle iron across the top to better keep out water.  A conduit runs from the top into the hood in...

This box represents the ASC boxes applied to the LIRR MP15AC’s when delivered from EMD. This box has a large door that hinges down, bolted shut on the top. A conduit runs from the top into the hood in front of the cab. The box sits on a basic...

This is the older style of US&S ASC box used on the LIRR Alco S2 and RS1 engines. It’s a large 3 strap box, with a homemade addition on top. On the front and rear are switch boxes. Along with the full latch detail, it even has the signal...

The GE MM24 axle generator (used for both wheel slip indicators as speedometers) was used on the majority of Alco, GE and even some EMD locomotives.  Our part has the cone mount to hold the generator itself mounted in place of the journal cover...

This kit includes the front and rear riser platform with dot pattern tread plate detail.  Two styles of drop step are included: early dot pattern tread, and later square diamond pattern tread.  It can be modeled with raised or lowered steps...