HO Scale

EMD “35” line low MU stands.  This is yet another part we have discovered in research that has never been offered before accurately with the properly rounded inner corner.  This is the low/single stand common on GP30’s,...

Southern Railway 1st order GP30 MU stand.  The 1st batch of GP30’s had this unique stand which had the battery jumper plug on the right side along with the dynamic brake plug.  The left side held a mirror image but without the...

Southern Railway early 2nd generation MU stand with battery jumper plug.  This style was used on the late GP30’s, GP35’s, SD35s. Each pack included 4 stands.

EMD GP7 “Tall” MU stands.  These were the first MU stands used on the GP7’s and have an angled receptacle.  This is mounted on to a 90° conduit connector and runs down to the deck.  There were a few options on how...

EMD GP7 “Tall” MU stands.  These were the first MU stands used on the GP7’s and have an angled receptacle.  This is mounted on to a 90° conduit connector and runs down to the deck.  There were a few options on how...

Pilot mounted MU plugs and cables. Includes standard 27 pin receptacles,  “plugged in” receptacles, angled receptacles, dynamic brake field loop plugs and MU cable ends. Useful for all makes of locomotive with pilot mounted MU...

This is the basic low style, second generation (-2) 27 pin MU stand, with the fixed mounted MU cable attached.  Includes: Deck mounted -2 Plug w/fixed cable, deck mounted -2 receptacle with “plugged in” cable end, pilot mounted...

This is the basic low style, first generation 27 pin MU stand, with the fixed mounted MU cable attached.  Includes: Deck mounted stand w/fixed cable, pilot mounted “plugged  in” cables, pilot mounted receptacle, deck mounted dummy...

This is the “modified” version of the tall GP7 stand.  It uses the same angled MU receptacle and conduit; however, it is now firmly mounted to the locomotive on a piece of C channel welded to the pilot.   Almost all of the...

27 Pin MU Cables. Includes enough to make 5 cables, plus some extra ends. Now revised with pre-formed holes! 

Union Pacific/Western Pacific handrail mounted “cans” for holding MU cables.  Includes wire for mounting on a handrail stanchion. Includes 5 holders and wire.

Dummy plug stand – a simple 27 pin receptacle. These are designed to be mounted on the top of a pilot/anticlimber.

Second Generation MU Stand – Switcher style with step light. Used on rear end of SW1500, MP15’s and some later SW1200’s. Includes 5 stands.

Second Generation MU stand – 27 pin only. Used on SD45 newer engines through the SD40-2, GP38-2, MP15, SW1500

First Generation MU Stand – Switcher style with step light. Used on SW1200 and some other 567 powered switchers (check prototype photos). Includes 5 stands and mounting wire.

First Generation tall MU Stand with 27 pin plug and a blanked over dynamic brake plug. Used on GP7, GP9 Includes 5 stands.

First Generation tall MU Stand with both 27 pin plug and dynamic brake field loop plug. Used on GP7, GP9 Includes 5 stands.

First Generation tall MU Stand with 27 pin plug. Used on GP7, GP9 Includes 5 stands.

First Generation MU Stand with 27 pin plug and a blanked over dynamic brake plug. Used on GP7, GP9, GP18, GP20 Includes 5 stands.

First Generation MU Stand with both 27 pin plug and dynamic brake field loop plug. Used on GP7, GP9, GP18, GP20 Includes 5 stands.