HO Scale

Sand bumpers were typically used in the early days of railroading to provide more robust end-of-track protection than a simple wooden track bumper. In the case of some rural branch lines, they remained in use through much of the 20th century. 2 Per Card

 Perfect for yards, sidings or main lines Magnet rotates to avoid accidental uncoupling Complete instructions, drilling jig, trackside marker and control knob all included Easily installed in new or existing Code 83 or 100 track Works with most...

Set-up is easy: all connections to the SmartSwitch board simply plug together or attache to screw terminal blocks. Programming is easily done using the detachable servo programming board, and full, plain-English instructions are included with each set.

The small herd of goats consists of one billy goat, six female goats as well as two kid goats. For small farmers, hobby farmers, and homesteaders alike, goats can be a great choice of species. Available in HO Scale. Set contains 9 pieces. Colors may...

This Industrial water supply tank has an unique look to it. It will be a conversational structure on your layout. This water tank was on my diorama for my Bisgeier Tool Company kit and lots of people asked me if I'll sell the water tank as a separate...

Every town needs an outhouse. This kit contains laser-cut wood walls, laser-cut tar paper and strip wood. This kit contains 2 outhouses.

The Clam Box is located on Route 133 in Ipswich, MA, and has been serving some of the best seafood in New England since 1935. Built by Dick Greenleaf, this unique structure and the food have been featured in many magazines and television shows including...

Dimensions of the bridge: 3-1/4" clearance, 7-3/4" long x 3-7/8" tall and 2" wide

Move heavy bulk loads for your railroad's customers with a fleet of WalthersProto 40' Ortner 100-ton Open Aggregate Hoppers. Highly detailed and fully assembled, other features include: One time run of these roadnumbers, order now - limited quantity...

*Note: Image reflects the paint scheme only. See listing for actual car number. -All are Ready-to-Run-Laser Sharp Painting and Printing-36" InterMountain Precision Metal Wheelsets-Metal Knuckle Couplers*Minimum Radius - 18"

The Plymouth Barracuda, a marque manufactured by Plymouth (Chrysler) between 1964 and 1974. Oxford has tooled up the model which represents the first generation of the Barracuda from 1964-1966. The Barracuda was part of Ford’s plan to introduce a new...

The 1965 Mustang was designed by the company’s in-house design team and from start to finish, the design, development and production was completed in a record 18 months. The result was ground-breaking! The Mustang was the first of a generation of Ford...

Brand new to Oxford’s American Classic series is the exciting introduction from the Henry Ford stable of post-war motoring extravaganza – the Ford Fairlane. This era of American cars saw the results of many new advances in technology and the introduction...

The American Dodge B-1B pickup manufactured by Dodge (Chrysler) between 1948 and 1953,was a ½ ton truck standard with a 95hp flathead straight-six engine and 3-speed manual gearbox, classed as a full-size 2-door pick-up with an FR layout. Unique to the B...

This elegant, very long Cadillac Sedan de Ville, appears in jet black with a very pale grey white interior, chrome trim and whitewall tyres. The 1961 four-door model represents the second generation of the De Villa series incorporating new physical and...

"Buick, part of General Motors in the USA, manufactured their Century range from 1936 right through to the 1990s with one or two gaps in between, including WWII. Over six decades, the Century came in various shapes and sizes and all with the same FR...

1-7/8 x 2-27/32 x 3-5/16" 4.7 x 7.2 x 8.4cm Protect busy track along your HO railroad with this classic Cornerstone(R) Signal Tower kit. This detailed structure features: Based on typical railroad interlocking towers used across North America Essential...

First built for Union Pacific in the late 1980's by General Electric, the DASH 8-40C diesel locomotives were identified by an enlarged exhaust stack and the mounting of the dynamic brake grids in a square-like unit behind the cab, which housed an...

Spurred by the postwar business boom and in an effort to replace worn out equipment, North American railroads built large numbers of 40' box cars to the AAR standard designs beginning in 1945. Prototypes were built with different combinations of roof...

MODEL FEATURES: Fine end handrails and ladders Clear windows Caboose trucks Separately applied smoke jack and brake wheel Body-mounted McHenry® operating scale knuckle couplers Weighted for optimum performance Machined metal wheels RP25...