HO Scale

A part synonymous with PRR (and later PC/CR) equipment is the 3-strap cab signal box. This is a huge box, applied to the front walkway that held the cab signal relays. These boxes are mounted on rubber isolators, which are in turn mounted to a piece of...

This box represents the ASC boxes applied to the LIRR MP15AC’s when delivered from EMD. In the late 1980’s, LIRR modified the boxes with an angle iron across the top to better keep out water.  A conduit runs from the top into the hood in...

This box represents the ASC boxes applied to the LIRR MP15AC’s when delivered from EMD. This box has a large door that hinges down, bolted shut on the top. A conduit runs from the top into the hood in front of the cab. The box sits on a basic...

This is the older style of US&S ASC box used on the LIRR Alco S2 and RS1 engines. It’s a large 3 strap box, with a homemade addition on top. On the front and rear are switch boxes. Along with the full latch detail, it even has the signal...

The GE MM24 axle generator (used for both wheel slip indicators as speedometers) was used on the majority of Alco, GE and even some EMD locomotives.  Our part has the cone mount to hold the generator itself mounted in place of the journal cover...

This kit includes the front and rear riser platform with dot pattern tread plate detail.  Two styles of drop step are included: early dot pattern tread, and later square diamond pattern tread.  It can be modeled with raised or lowered steps...

A semi-modern spark arrestor, mainly used on switchers but road units as well.  Features a large “drum” housing, which has an internal vane system to catch embers.  A small drain plug is on one side. Includes 1 pair.

Includes 4 different modern electronic speedometer drives. Set includes:– 2x Pulse Speedometer Drives, one journal mounted, and one flange mounted,– 2x Aeroquip Speedometer Drives, one journal mounted and one mounted on a raised platform...

This is a gear driven speedometer drive, which would be used with older, drive cable operated speedometers like Barco and Chicago Pneumatic speed recorders.  These were used on just about every type of EMD locomotive from F units to SD40-2’s...

The GE MM24 axle generator (used for both wheel slip indicators as speedometers) was used on the majority of Alco, GE and even some EMD locomotives.  Our part has the cone mount to hold the generator itself mounted in place of the journal cover...

Super Company non-lifting switcher mount spark arrestor.  This spark arrestor features a triangular mesh trap mounted between two sheet metal brackets.  This kit is the switcher style, with a flat plate bottom to slide over the stacks.  We...

Developed in the mid 1960’s by John B. Rogers, and produced by the Super Company of Ft. Worth, Texas.  These were sold as lifting style spark arrestors.  Inside of the sheet metal housing, was a movable, chain mail like mesh.  ...

Developed in the mid 1960’s by John B. Rogers, and produced by the Super Company of Ft. Worth, Texas.  These were sold as lifting style spark arrestors.  Inside of the sheet metal housing, was a movable, chain mail like mesh.  ...

Developed in the mid 1960’s by John B. Rogers, and produced by the Super Company of Ft. Worth, Texas.  These were sold as lifting style spark arrestors.  Inside of the sheet metal housing, was a movable, chain mail like mesh.  ...

A unique, octagonal style exhaust stack fabricated by the Illinois Central and included on several of their rebuilt projects. Includes 1 pair of stacks.

A commonly overlooked detail, but one featured on every 1st generation locomotive, is the water filler pipe on the roof.  We have 3 styles of 100% scale water fill pipes.  3x are 2 ½” pipe: A basic capped pipe, a piped cap...

The EMD hood mounted bell was utilized by numerous railroads, starting around GP30 production. Our kit includes the bracket, which has an inner channel so it can be firmly attached to the shell using a piece of wire (included), two bells, as well as the...

Likely the most common style of bell used on EMD locomotives is the basic frame mounted bell.  The bell is attached to a simple “U” shaped piece of steel.  A small notch is provided on one side of the mount so it can be attached...

This is the first of several bell kits we will be introducing over the next few months.  This bell was used from the SW1 through SW1200 switchers.  There are two brackets included, one with an air line bracket, and one without.   Our...

This is a very basic light, with a rounded top to match the profile of the bulb.  Illinois Central and lots of midwest shortlines used this style of ditch light.  Like our other ditch lights, these come cored with a mount to fit an 0402 LED, as...