HO Scale

The 5 chime, low profile Nathan K platform was introduced in 1977, at the request of Amtrak.  This horn features Nathan Airchime style snow cones on the bells, common on many modern commuter engines.  2 Per Package. Bells: 1, 2, 3A, 4A, 5...

The 5 chime, low profile Nathan K platform was introduced in 1977, at the request of Amtrak.  This horn features Amtrak made “Beach Grove” style snow cones on the bells.  2 Per Package. Bells: 1, 2, 3A, 4A, 5 (K5LA)Manifold Style:...

The 5 chime, low profile Nathan K platform was introduced in 1977, at the request of Amtrak.  This horn features the “Conical Debris Filters” on the bells.  2 Per Package. Bells: 1, 2, 3A, 4A, 5 (K5LA)Manifold Style: Low Profile

The 5 chime, low profile Nathan K platform was introduced in 1977, at the request of Amtrak.  Airchime marketed a Canadian version, using bells #1, 2, 3, 4 and #5. Nathan offered the horn to the US with bells #1, 2, 3A, 4A, 5.  The difference...

Nathan Manufacturing introduced the A cord to the horn platform in 1977 and has since become one of the most utilized horns in the country.  This horn is on the tall “H” bracket uses bells #1, #2 and #4A.  This horn has all bells...

Nathan Manufacturing introduced the A cord to the horn platform in 1977 and has since become one of the most utilized horns in the country.  This horn is on the tall “H” bracket uses bells #1, #2 and #4A.  The #1 is mounted in the...

Introduced in 1954, the “Kettle Drum” line of horns uses a one-piece bell and power chamber.  This version is on the low-profile manifold, and plays the Canadian mandated cord with bells #1, #2 and #3. The prototype was produced by...

Offered to comply with Canadian mandates, the S-3K-R was used extensively by the Pacific Northwest railroads. This version uses the larger diamond manifold, spike back power chambers and uses bells #31, #37 and #48.  This version has the #31 bell...

Often dubbed as the king of all train horns, the Leslie 5 chime platform was certainly the largest! The RS-5T has a tall manifold, and uses bells #25, # 31, 37, 44 and #55.  This version has the #44 and #55 bells reversed in the center, upper...

The quintessential Conrail horn! In 1979, Leslie updated the power chamber design to a new, revised spike back style, giving the horn a distinct squeal.  This version uses the low-profile manifold and spike back power chambers and uses bells #25,...

Offered to comply with Canadian mandates, the S-3K-R was used extensively by the Pacific Northwest railroads. This version uses the larger diamond manifold and dome back power chambers and uses bells #31, #37 and #48.  This version has the #31 bell...

The Leslie SupterTyfon series was introduced in 1951 as a multi-chime platform replacement for the Tyfon series.  This early version uses the tall diamond manifold, tab back power chambers and uses bells #25, #31 and #44.  This version has...

Smaller sibling to the A-200, the A-125 was commonly used on early switchers.  The A-125 has a sharper note – perfect for getting your attention in a steel mill.  This version comes mounted on the EMD early switcher bracket, used on SW1,...

Introduced in 1934, the Leslie Tyfon A200-156 was a horn made famous as the GG1 “Blat” horn.  Used on everything from steam engines, early switchers to F units and everything in between, including US Navy Fleet Submarines! This version...

A very common horn used by multiple railroads.  This version features scallop-based bells, used from 1952 through the end of production.  2 Per Package.  Bells: 1, 2, 4Manifold: 3 ChimeEra: 1952+

A basic stand that installs in place of the truck assembly to allow for assembly, painting, weathering, etc. without the fear of damaging any under body details.   $5.00 per pair.

These are 100% scale joint bars, with no bolts.  Perfect for MOW scenes, yards, hirails, etc.  Includes 3 styles of bar: 115# 6 bolt joint bars, 90# 4 bolt joint bars and 75# full toe angle bars.   Includes 12 of each style. These are...

Our first of several sets of 100% scale track tools.  This set includes some of the basic staples: Spike Mauls, Pick Ax’s, Double Ended Track Bolt Wrenches, Claw Bars & Track Levels.  Each package includes 3 of each tool (unpainted)...

A sight common around any railroad are spike kegs.  These are typically sheet metal pails filled with railroad spikes, or track bolts.  Includes 4 unpainted styles of “new/full” kegs: 50# plastic buckets, 100# kegs and two styles...

Your classic 5-gallon bucket, used for everything and anything! Great for trucks, outside of shops, stack caps, etc.  Includes 16 unpainted buckets, 8 with lids, and 8 open. Pilot holes are included for wire handles if the modeler wishes to add...