HO Scale Track and Accessories

Double Crossover Controller - use w/#948-83051 sold separately Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your...

Kit includes: (1) 3D printed, finished, and painted Lubricator Pump Unit (1) Custom decal set for kit (2) 3D printed and painted track applicator pieces (1) 3D printed and painted Solar Panel (1) Brass poll with (2) 3D printed and painted mounts (2)...

Add more operating fun to WalthersTrainline and other HO sets (sold separately) in minutes with easy-to-use Power-Loc(TM) track, now with nickel silver rail for better performance plus brown ties and gray roadbed for added realism! Other features of...

Add more operating fun to WalthersTrainline and other HO sets (sold separately) in minutes with easy-to-use Power-Loc(TM) track, now with nickel silver rail for better performance plus brown ties and gray roadbed for added realism! Other features of...

Grow your HO Layout with the Lionel HO Figure 8 Expansion Pack! Features: Expand your set to a Figure 8 Code 83 Nickel Silver rail Must have existing HO FasTrack Loop 41 x 59 inch oval Connections under roadbed for easy electrical hook up

Grow your HO Layout with the Lionel HO Curved Terminal Track!

Grow your HO Layout with the Lionel HO 90 Degree Crossing!

Use these when creating a diagrammatic control panel to clip fit PL-26 Passing Contact Switches, PL-22 On/Off Switches and PL-23 On/On Switches in the required place. PL-26 Passing Contact Switches PL-22 On/Off Switches PL-23 On/On Switches

Allows adjacent switches in the PL-27 Switch Console and PL-50/51 Switch Module Unit to be ganged together and operated simultaneously. PL-26 Passing Contact Switches PL-22 On/Off Switches PL-23 On/On Switches

Single Pole On/On Switch. Use this to switch power from one device to another or for operating items such as 2 aspect colour light signals. PL-27 Switch Console Unit PL-28 Switch Mounting Plates

Clip this unit either side of an insulation gap on Peco H0/00 track. This can be used to isolate a loco at the end of a terminal road or siding, thereby enabling another loco to take the stock out. This is available as a ready made item in the Peco 00...

This unit enables a PL-10 Turnout Motor to be mounted on the surface of the baseboard, an optional extension arm is also included. A removable over centre spring is fitted, useful for turnouts which do not have this feature. PL-10 Turnout Motors PL-10W...

TwistLock a basic electric solenoid motor, for operating (in the main) turnouts. It is powered by a normal 16vAC supply (and can take up to 3 amps) and is fully compatible with all PECO turnouts up to O gauge (and can handle many other proprietary brands...

Kit includes: (3) Wheel chocks   Hold your railcars in place on grades or when spotted at industries with MACRail's Portable Wheel Chock. The long durable handle is oversized to survive the 1:1 scale fingers that will have to set and pull the...

Kit includes: (2) Derails (3) Derail Sign Targets (3) Pieces of brass for sign (1) Custom decal set   Protect those sidings or tracks temporarily with our Portable Derail "The Ole". Inspired by the a portable derail design published in Model...

Take your modeling fun to a new level with the WalthersTrainline Bridge and Pier set! Add up and over action using Power-LOC(TM) track, Bachmann EZ-Track(R) or sectional track (each sold separately). Other features of this fun accessory set include: Use...

Sand bumpers were typically used in the early days of railroading to provide more robust end-of-track protection than a simple wooden track bumper. In the case of some rural branch lines, they remained in use through much of the 20th century. 2 Per Card

 Perfect for yards, sidings or main lines Magnet rotates to avoid accidental uncoupling Complete instructions, drilling jig, trackside marker and control knob all included Easily installed in new or existing Code 83 or 100 track Works with most...

Set-up is easy: all connections to the SmartSwitch board simply plug together or attache to screw terminal blocks. Programming is easily done using the detachable servo programming board, and full, plain-English instructions are included with each set.

HO scale or N scale - Hydrocal Small Bridge