HO Scale Bachmann EZ Track

Sand bumpers were typically used in the early days of railroading to provide more robust end-of-track protection than a simple wooden track bumper. In the case of some rural branch lines, they remained in use through much of the 20th century. 2 Per Card

Nickel silver track with gray roadbed; 1/cardLonger than E-Z Track® Remote Turnout - Right, the #5 Turnout - Right allows for smoother transitions between tracks during switching operations. It also accommodates locomotives and rolling stock...

Nickel silver track with gray roadbed; 1/cardLonger than E-Z Track® Remote Turnout - Left, the #5 Turnout - Left allows for smoother transitions between tracks during switching operations. It also accommodates locomotives and rolling stock...

Nickel silver track with gray roadbed

It's never been easier to get started in model railroading! Bachmann's Your First Railroad Track Pack contains all the track you need to build the layout featured in the included DVD, Building Your First Model Railroad. Hosted by...

Nickel silver track with gray roadbed; 1/cardIn addition to many other uses, the 30 Degree Crossing is the centerpiece of a basic “Figure 8” track configuration. To make a 76" x 39" Figure 8, you also need 21 pieces of 18” Radius Curved...

Nickel silver track and gray roadbed; 2/cardThis rerailer is designed to correct derailments that sometimes occur during normal railroad operations. It can also be used to help properly align wheels on the track when assembling a train for operation. If...

Nickel silver track with gray roadbed; 4/card15” Radius Curved Track is best used to make railroad curves in tight spots on your railroad layout and appropriate for locomotives and cars with short wheel bases. Four pieces of track make up one-third...

Steel alloy track with black roadbed; 1/cardThe terminal rerailer is connected via terminal wires to a power pack, which provides current to power the layout. In addition to making power connections, the terminal rerailer is designed to correct...

Nickel silver track with gray roadbed; 1/cardThe terminal rerailer is connected via terminal wires to a power pack, which provides current to power the layout. In addition to making power connections, the terminal rerailer is also designed to correct...

Nickel silver track with gray roadbed; 1/cardThis is the basic turnout of the E-Z Track® system with a turnout radius matching 18” Radius Curved Track. If you have enough room, you may consider larger E-Z Track® turnouts...

Nickel silver track with gray roadbed; 1/cardThis is the basic turnout of the E-Z Track® system with a turnout radius matching 18” Radius Curved Track. If you have enough room, you may consider larger E-Z Track® turnouts...

Steel alloy track with black roadbed; 4/card22” radius curved track is best used to make relatively wide railroad curves. This track accommodates longer locomotives and rolling stock, and permits mainline operation at higher speeds. It can be...

1 per card Note: All analog turnouts (non-DCC) require 16V AC or DC accessory power supply for operation.

1 per card Note: All analog turnouts (non-DCC) require 16V AC or DC accessory power supply for operation.

Build your modern high-speed rail network with the latest additions to our snap-fit E-Z Track® system! Our new Concrete Tie Track with Nickel Silver Rails will look the part on any modern era mainline railroad from the BNSF Transcon to the...

Nickel silver track with gray roadbed

Nickel silver track with gray roadbed

Nickel silver track with gray roadbed

Nickel silver track with gray roadbed