HO Scale Track Accessories

Use these when creating a diagrammatic control panel to clip fit PL-26 Passing Contact Switches, PL-22 On/Off Switches and PL-23 On/On Switches in the required place. PL-26 Passing Contact Switches PL-22 On/Off Switches PL-23 On/On Switches

Allows adjacent switches in the PL-27 Switch Console and PL-50/51 Switch Module Unit to be ganged together and operated simultaneously. PL-26 Passing Contact Switches PL-22 On/Off Switches PL-23 On/On Switches

Single Pole On/On Switch. Use this to switch power from one device to another or for operating items such as 2 aspect colour light signals. PL-27 Switch Console Unit PL-28 Switch Mounting Plates

Clip this unit either side of an insulation gap on Peco H0/00 track. This can be used to isolate a loco at the end of a terminal road or siding, thereby enabling another loco to take the stock out. This is available as a ready made item in the Peco 00...

This unit enables a PL-10 Turnout Motor to be mounted on the surface of the baseboard, an optional extension arm is also included. A removable over centre spring is fitted, useful for turnouts which do not have this feature. PL-10 Turnout Motors PL-10W...

TwistLock a basic electric solenoid motor, for operating (in the main) turnouts. It is powered by a normal 16vAC supply (and can take up to 3 amps) and is fully compatible with all PECO turnouts up to O gauge (and can handle many other proprietary brands...

Kit includes: (3) Wheel chocks   Hold your railcars in place on grades or when spotted at industries with MACRail's Portable Wheel Chock. The long durable handle is oversized to survive the 1:1 scale fingers that will have to set and pull the...

Kit includes: (2) Derails (3) Derail Sign Targets (3) Pieces of brass for sign (1) Custom decal set   Protect those sidings or tracks temporarily with our Portable Derail "The Ole". Inspired by the a portable derail design published in Model...

Take your modeling fun to a new level with the WalthersTrainline Bridge and Pier set! Add up and over action using Power-LOC(TM) track, Bachmann EZ-Track(R) or sectional track (each sold separately). Other features of this fun accessory set include: Use...

 Perfect for yards, sidings or main lines Magnet rotates to avoid accidental uncoupling Complete instructions, drilling jig, trackside marker and control knob all included Easily installed in new or existing Code 83 or 100 track Works with most...

Set-up is easy: all connections to the SmartSwitch board simply plug together or attache to screw terminal blocks. Programming is easily done using the detachable servo programming board, and full, plain-English instructions are included with each set.

Used to weather nickel silver or brass track, rail, or rail joiners to match Micro Engineering Weathered Flex-Track and nickel silver weathered rail.

Used to weather nickel silver or brass track, rail, or rail joiners to match Micro Engineering Weathered Flex-Track and nickel silver weathered rail.

Ribbonrail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking and joining rail. Track...

Kato's line of ground level UNITRACK offers a variety of pieces and turnouts to allow you to build any layout your heart desires, all while ensuring track quality and steady delivery of electricity to your locomotives. Available both as individual pieces...

The Atlas Under-Table Switch Machine is an under-table design for use with right or left hand turnouts. For use with Atlas HO and N Scale turnouts.

The Atlas Twin is a panel with double-pole, double-throw (DPDT) reversing switches wired in parallel. Useful for reversing sections and turntable control on single-cab layouts, plus many other applications. The Twin has threaded screw hole terminals to...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is...