HO Scale Track Accessories

Overall diameter; 327mm (12 7/8in). Hole required; 309mm (12 ¼in). Deck length; 305mm (12in). Depth below baseboard; 31mm (1¼in).

Designed and developed by the NMRA (National Model Railroad Association) Engineering committee, this pocket sized gauge enables you to check all important dimensions on your track and rolling stock as follows: Gauge of track and turnouts Flangeway...

HO Scale Left Hand Turnout pads Made from the same high quality cork as our regular roadbed, turnout pads are easy to work with and offer excellent sound absorption. 1 pair.

HO Scale Right Hand Turnout pads Made from the same high quality cork as our regular roadbed, turnout pads are easy to work with and offer excellent sound absorption. 1 pair.

Cork roadbed resembles the ballast used on real railroads. Its beveled edges enhance this realism. It has consistent thickness, is lightweight, cuts and shapes easily, and offers excellent sound absorption.  25 pieces per box.  Dimensions:...

Die-cast three point track gauge with centerline indicator. Code 83 on one side, code 100 on the other.UPC: 765484003434

Die-cast three point track gauge with centerline indicator. Code 70 on one side, code 100 on the other.UPC: 765484003410

#309 Under-the-Ties Delayed-Action Electric Uncoupler Kit - HO Scale          #309 Under-the-Ties Delayed-Action Electric Uncoupler Kit - HO Scale Kadee® #165 Red - Normally Open momentary contact push button...

Set includes three switch stands, 24 rail bolts bars, 42 rail braces, 12 frog bolt bars, six Code 70 guardrails, six Code 83 guardrails, six CVT throw bars, six CVT Point retainers plates and three CVT head tie blocks. Central Valley Modelworks HO Scale...

Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting.  All 200 series units (Sprung) have internal springs so they can be connected directly to the turnout throwbar...

The 210S has an operating Target and has the numbers 1 through 9 included so yard tracks can be numbered.  The ground throw is assembled ready for use and ABS Target parts are included for the modeler to assemble the display. Features...

Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting. All 200 series units (Sprung) have internal springs so they can be connected directly to the turnout throwbar...

The 200S series are internally sprung stands.  Stainless steel springs take up the overtravel and maintain tension to hold the movable points agianst the stock rails of the turn out.  These springs make the machines easy to mount to the turnout. Features...

The SPDT contact can be used to power a turnout frog, a signaling system, or a relay coil.  A shim to raise the stand to tie level and five different end fittings to connect to most turnouts are provided.  Hook end for Atlas, blade for Roco, hole for...

HO scale with .190" travel and operating targets. Features All Ground Throws offer these advantages: Molded of strong, self-lubricating black Delrin External cam provides maximum life and travel Cam design provides lock on both ends of...

Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting. All 100 series (Rigid) stands require modelers to fabricate a spring connecting link between the stand and the...

Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting.  All 100 series (Rigid) stands require modelers to fabricate a spring connecting link between the stand and the...

4 per pack designed for use with HO and On30 locomotive drivers (can also be used for non-drive wheels) full electrical pickup perfect for workbench testing

Glue ballast the easy way with this handy tool.

Spread ballast the easy way with this handy tool.