HO Scale Track Accessories

For DCC Operation The Walthers Cornerstone Turntable Advanced Control Module makes it possible to operate your Motorized Turntable using DCC, serial UART, keypad or switch contacts. For DCC applications this circuit will function as a stationary decoder...

800mA, 16V DC Output Power your Walthers Cornerstone HO or N Scale Turntables (sold separately) quickly and easily with this plug-in wall unit featuring: Installs in minutes - instructions included Independent 800 ma 16VDC filtered power supply Includes...

3 SPST On/Off Switches in Parellel The Atlas Connector is a panel with three on-off switches for track sections (blocks) or accessories. It has three SPST (single-pole, single-pole) on-off switches in parallel. Use to control power to sidings,...

1:87 HO Scale - Operating Derail "Flip Type - The Scotty" (2 Pack)   Kit includes: (2) Assembled "Flip" type derails  (1) Custom decal set for adding different styles of right of way derail signs    ** QR link to instructions...

  For use with all solenoid motors (e.g. PL-10 and Pl-11). Connect this unit to the 16v ac supply on your transformer. The capacitor stores up power and discharges a 'kick' to ensure turnout blades 'snap over' every time. PL-10 Turnout Motors ...

 This fits directly to the PL-10 family of Turnout Motors. The 2 single pole changeover switches can be used to control polarity, route selection diagrams, or 2 aspect colour light signalling etc. Rated 16v 2amps (continuous) or 2.5amps (momentary)...

Product Information Ribbonrail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking and...

Product Information Ribbonrail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking and...

 PECO Streamline transition track for connecting Code 83 and Code 100 track. Length: 914mm

 Belt-driven for quiet operation.  Atlas 305 - Manually Operated Turntable  - HO Scale

Space your track the easy way with this handy tool that is designed to keep the same distance between the centers of adjacent and parallel track. You can adjust the distance between the middle of track from 50 mm to 95 mm or from 2 inch to 3.7 inch. Use...

This kit contains spare pads for the Dapol OO/HO Gauge Track cleaner. There are 10 abrasive cleaning and 20 polishing pads, enabling you to keep your track in peak condition

Fully assembled, 9" diameter turntable has the ability to stop at 21 positions, 15 degrees apart. Geneva movement locks table in exact position every time. Simulated wood brown turntable deck and concrete pit ring. Surface mount; no cutting necessary...

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these switches without soldering; the included Shrouds prevent...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts with this five-pack of Switch Machines! The Layout Control System is expandable at any time to grow with your layout, and can be...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts with this five-pack of Switch Machines! The Layout Control System is expandable at any time to grow with your layout, and can be...

Double unit loco lift. Designed as a replacement for the old SL-43 Loco Lift, this new versatile system still has the features that made the SL-43 so popular, such as the ability to directly drive the locomotive on and off the track. But that was limited...

A small but useful item to ensure the accurate spacing of double tracks in 00/H0 along both straight and curved sections. Also gauges platform height to the recommended 14mm (3ft 6ins in 4mm scale). PECO 00/H0 Code 100 Setrack and Streamline track...

Clips directly into a Peco 00/H0 Setrack Turnout, either Left or Right Hand. No holes to drill, and this unit is pre wired. Can also be used with 00/H0 Streamline Turnouts. PL-26 Passing Contact Switches PL-50 Turnout Switch Modules PL-51 Turnout...

Keep the two-sided Rail Pal handy for quick fixes. Use to smooth track imprefections and remove dirt and track contaminants, such as paint, adhesives and grime. 2-sided for light and heavy cleaning. Does not crumble. 1/pkg   About Tidy Track™ Track and...