N Scale

N Scale T-trak bridge drop module the measures 12 1/8 by 14 inches with a 2 in drop in the center. The bridge module is set up for using the Kato 20-40 or 20-45 sections on the ends and either the Kato 20-010 186mm track section or the bridge in the...

A small branch-line engine house or car shed. Will fit a GP-38 or 50 ft cars. Or use a as a heavy equipment repair building. Our weathered printed paper siding is supplied as shown. Foot print f 3 x 5 inches

This kit is based a store in Belville, NC. Stores such as these used to be in every town and hamlet and may are still in use in small town across the county . So this structure will fit in most any era being modeled.

A prefect small brick building for that downtown main street. Includes interior parts including a partition wall with teller windows, two tables for the lobby and interior lighting by a supplied LED light. Foot print with sidewalk 1 9/16 x 2 1/4 inches

This kit is typical of many of the small town General Stores found all over the country. With store in front and warehouse/mill in the back. Kit contains laser cut wood walls, Tichy windows and our paper corrugated roofing. Foot print: 2 1/2” x 4 1/2”

A run down, falling down Garage with outside bracing holding it up. Kit includes interior stud framing, Exterior siding and engraved nail holes, siding cut out to expose the framing, laser cut windows and trim plus the window glass is laser cut from...

Carl’s cabin is like many that were found in logging and mining camps. Today you will find them used as hunting camps, vacation getaways and can even be used as a wrong side of the tracks house. Footprint: 1 1/4” by 2 1/4”

Canadian Northern Railway Standard 24' x 35' Freight House. This kit was based on the original 1907 drawings. Foot Print: 2.25" x 2.625"

A small country store that fits in any era from the 1800’s to today. Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing. Footprint: 1 3/8" x 2 1/8".

Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing. Footprint" 1 7/8” by 2”

Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing. Footprint: 1.75" x 2.0".

This could be a Blacksmith shop, Gunsmith shop, Carriage Repair shop or any other tradesman's shop. Footprint: 1.75" x 2.25".

False front stores like these were a staple on main streets all over North America. Footprint: 1.75 x 2.25 inches.

This car was made to replicate a abandoned passenger car that has seen much better days. These can still be found in yards or on abandoned lines.

Based on one of many log cabins built by the early settlers all over the country. Many are still being used today as summer or hunting camps and at resorts as overnight lodgings. Footprint 1.25” x 1.25”.

Based on one of many log cabins built by the early settlers all over the country. Many are still being used today as summer or hunting camps and at resorts as overnight lodgings. Footprint 1.25” x 1.25”.

PECO STREAMLINE N CODE 55 3 WAY TURNOUT, MEDIUM RADIUS The 3 way turnout is an ideal way to save space on station approaches, junctions etc. Despite a low visible rail height of just 1.4mm, all brands of N Gauge model locomotives will run on this...

5-piece setLED lights for low current drain and long lifeAssorted colors and modelsPre-wired and ready for use; resistor attachedUse 15 to 19 volts

This signal head can be used with any of our Signal Ground Mast Assemblys to create your own unique Color Light signal build. The kit consist of two resin parts and detailed instructions. Our N Scale Color Light LED Assembly kit #LED0009 (must be...