N Scale

This kit has the parts for 9 lumber stacks. Each stack is 4 scale feet wide and 30 inches tall. Each stack is made from 6 layers of 1/32 Basswood colored Taskboard and have staggered ends , with the top and bottom layer being engraved for boards. A good...

This kit has the parts for 9 lumber stacks. Each stack is 4 scale feet wide and 30 inches tall. Each stack is made from 6 layers of 1/32 Basswood colored Taskboard and have staggered ends , with the top and bottom layer being engraved for boards. A good...

Fence leans to the side about 9 degrees from vertical for the falling over look. Include 6 - 24 scale feet long 6 foot high panels and all are different as to ageing and sections cut out.

A sheet includes 8 wheels at 48” and 54" in diameter and 8 wheels at 66” and 72" In diameter.

Delivery wagons based on drawing and Photos of wagons used from the 1850’s till the early 1900’s. Kit contains parts for Two wagons cut from laser board and micro plywood.

The kit has parts to make one flat car or gondola. The price is less trucks and couplers. It takes Micro trains trucks with short extension couplers.

The kit has parts to make one flat car or gondola. The price is less trucks and couplers. It takes Micro trains trucks with short extension couplers.

Kit contains 6 - 80 Foot Span Trusses with a 4/12 Slope.

Kit contains 10 - 50 Foot Span Trusses with a 4/12 Slope.

N Scale T-trak bridge drop module the measures 12 1/8 by 14 inches with a 2 in drop in the center. The bridge module is set up for using the Kato 20-40 or 20-45 sections on the ends and either the Kato 20-010 186mm track section or the bridge in the...

Simple to build and lightwieght, these are the ideal module to get started in T-Track or model railroading in general. Made from 1/8th" plywood with tab and slot construction, the only tool needed to build is a small hammer. These are the 12 1/8" x 12...

Simple to build and lightwieght, these are the ideal module to get started in T-Track or model railroading in general. Made from 1/8th" plywood with tab and slot construction, the only tool needed to build is a small hammer. These are the 12 1/8" x 12...

A nice side factory or warehouse for your layout. Foot print is 11 1/4 x 3 inches and includes Tichy windows and doors plus pre-colored roofing

This is a laser cut unpainted wood kit that needs assembly. Includes material for one house and two sheds. Fencing NOT INCLUDED. The photos of the Three are of the N scale build the other is the HO version. These are based on a photo of housing for...

This kit is bases on the silo in Monett Missouri. The silo was all that is left of a old brewery that was by the rail yard just south of town. In 2020 the town paid to have Raine the Americas Muralist (www.americasmuralist.com ) come up with w design...

This station was at junction of the D&H and Middleburgh and Schoharie RR's near what is now Central Bridge NY . The station was built sometime as round 1880 and used till the Railroad folded in the late 1930's. Footprint: Building 2.25" x 5.125",...

Included interior details as shown plus 2 cars. Show room interior has parts counter and 4 parts racks 2 LED lights , Street sign and base, 2 fuel pumps and a sign sheet with 2 different names Steve’s and Acme Auto Repair. Foot print without fuel island...

Based on the Canadian Pacific enclosed water tower. The kit includes laser cut parts and Grandt-Line detail parts. Footprint: 2.25" x 2.25" x 4" tall.