N Scale

Prototype History: Cut Levers (or 'Cut Bars') are used to vertically lift or pull the coupler pin on all rolling stock. Simply put, these long, horizontal levers give train crews the leverage needed to open or close a coupler. This style of Cut Lever is...

Prototype History: This style of cut levers is common on all EMD diesel locomotives produced after the early-mid 1970's. Each set includes one pair of chemically-etched, Modern EMD Cut Levers and associated mounting pins. Model Features: €¢ Etched in ...

Prototype History Disliked by many railroaders, Remote Controlled Locomotives (RCL€™s) are becoming a common site around the country.  Our new set of numerous RCL Antenna Stands will make your modern switching fleet stand out! This detail set is etched...

Increase the Pulling Power of Your Engines Got a loco that can't get a grip? Bullfrog Snot provides a quick and easy way to improve the pulling power of HO, N or Z Scale engines - without taking them apart! Simply power up your loco so the wheels spin...

Bar Mills N Scale Insta-Fence detailed fencing, complete with realistic signs, includes everything you need for about 160 scale feet of fence for N train layouts and dioramas. Create privacy for residential yards, fence in an industrial site or surround...

There are plenty of trestles available to modelers that are spanning the "Grand Canyon"... but what if your layout just has to traverse wetland, or mild geographical depressions ? That's what the "LowBoy" is all about. You can link several kits together

Lightly remove sharp edges from castings, spray with Grey Primer and paint to suit.

Lightly remove sharp edges from castings, spray with Grey Primer and paint to suit.

Lightly remove sharp edges from castings, spray with Grey Primer and paint to suit.

Percy is the No. 6 green engine. He is the junior member of Sir Topham Hatt’s railway. He is quite content puffing around the yard with no particular desire for adventure in the world outside. Percy is Thomas' best friend and his favorite job is...

Nickel silver track with gray roadbed. Two of each: 0.75", 0.875", 1.125" and 1.5" per card. The 8 pieces of track in this package are designed to provide layout flexibility and can also be used as gap fillers in more sophisticated railroad construction.

Nickel silver track with gray roadbed; 1 per card. The under-track terminal track section in this package facilitates power connections from beneath the layout, eliminating the need to hide exposed wires.

With the Nickel Silver E-Z Track® Expander Set, you can add to the track included with our train sets or create new configurations of turnouts, branchlines, and double-track mainlines on your existing railroad. E-Z Track® lets...

Bachmann Trains E-Z® RAILER - N Gauge. Lets you simply slide your N and HOn30 Scale trains onto the track. Compatible with all track brandsFeatures: For use with all N Track Brands Aligns your locomotives and rolling stock easily Simply roll your...

Nickel silver track and gray roadbed; 2/card. These bumpers properly finish the ends of your track spurs.

Includes all the E-Z Track® you need to create a complete 54" x 23.5" Figure 8. Set contains: 17 pieces of 11.25" radius curved track 1 piece 11.25" radius curved terminal rerailer 4 pieces 10" straight track 90 degree crossing power wire

Nickel silver track with gray roadbed; one per card. The #6 Single Crossover Turnout - Right connects parallel tracks, allowing equipment with longer wheelbases to cross over smoothly and at higher speeds. Note: All analog turnouts (non-DCC) require 16V...

Nickel silver track with gray roadbed; one per card. The #6 Single Crossover Turnout - Left connects parallel tracks, allowing equipment with longer wheelbases to cross over smoothly and at higher speeds. Note: All analog turnouts (non-DCC) require 16V...

N Scale E-Z Track® Blinking Bridge - Black. Add some lighted action to your N Scale E-Z Track® railroad! This classic truss-design Blinking Bridge comes with a track-powered operating, flashing LED light on the roof. Also...

Compatible with steel alloy and nickel silver E-Z Track®