N Scale

Great for stone walls or foundations. Laser cut from Taskboard. Each sheet is 4 x 8 inches. Comes in 1/32" and 1/16" thickness.

Sheets are true scale size 2x8 wood form section in a running bond. Can be used for foundations, retaining walls and portals, any were concrete has been formed when poured. Sheets cut from laser board and come in a neutral ivory color and are 1/64th inch...

Kit contains a sheet of 4" x 8" siding with 6" scale spacing.

A wood deck for Atlas 3800 Series 50 ft flat cars. The kit includes laser cut micro plywood and laser board parts with 3-M peal and stick backing for a easy no glue conversion. If you don't need or want the backing let us know and will ship your kit...

A wood deck for Micro Trains 45000 Series 50 ft flat cars. These include the new Military and Ringling Brothers cars and others. The kit includes laser cut micro plywood and laser board parts with 3-M peal and stick backing for a easy no glue conversion...

Each kit contains 12 laser engraved shelves that are a scale 8 foot high by 10 foot long and 10 inches deep. These come unpainted and need to be finished. Note: For the photos, the shelves were sprayed white.

This kit has the parts for 9 lumber stacks. Each stack is 4 scale feet wide and 30 inches tall. Each stack is made from 6 layers of 1/32 Basswood colored Taskboard and have staggered ends , with the top and bottom layer being engraved for boards. A good...

Kit contains 7 - 18 foot ladders.

Stair case with hand rails 3 per kit includes a assembly jig. Designed so they can go in any direction from building.

The kit has parts to make one flat car or gondola. The price is less trucks and couplers. It takes Micro trains trucks with short extension couplers.

N Scale T-trak bridge drop module the measures 12 1/8 by 14 inches with a 2 in drop in the center. The bridge module is set up for using the Kato 20-40 or 20-45 sections on the ends and either the Kato 20-010 186mm track section or the bridge in the...

A small branch-line engine house or car shed. Will fit a GP-38 or 50 ft cars. Or use a as a heavy equipment repair building. Our weathered printed paper siding is supplied as shown. Foot print f 3 x 5 inches

This kit is based a store in Belville, NC. Stores such as these used to be in every town and hamlet and may are still in use in small town across the county . So this structure will fit in most any era being modeled.

A prefect small brick building for that downtown main street. Includes interior parts including a partition wall with teller windows, two tables for the lobby and interior lighting by a supplied LED light. Foot print with sidewalk 1 9/16 x 2 1/4 inches

This kit is typical of many of the small town General Stores found all over the country. With store in front and warehouse/mill in the back. Kit contains laser cut wood walls, Tichy windows and our paper corrugated roofing. Foot print: 2 1/2” x 4 1/2”

A run down, falling down Garage with outside bracing holding it up. Kit includes interior stud framing, Exterior siding and engraved nail holes, siding cut out to expose the framing, laser cut windows and trim plus the window glass is laser cut from...

Carl’s cabin is like many that were found in logging and mining camps. Today you will find them used as hunting camps, vacation getaways and can even be used as a wrong side of the tracks house. Footprint: 1 1/4” by 2 1/4”

Canadian Northern Railway Standard 24' x 35' Freight House. This kit was based on the original 1907 drawings. Foot Print: 2.25" x 2.625"

A small country store that fits in any era from the 1800’s to today. Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing. Footprint: 1 3/8" x 2 1/8".

Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing. Footprint" 1 7/8” by 2”