RslaserKits

Includes metal standing seam roofing, rolling on porch, Laser cut peel and stick board and batten siding and signs for four businesses. Note: This is the front Facade only. Kit Includes the front...

This is a laser cut unpainted wood kit that needs assembly. Includes material for one house and two sheds. Fencing NOT INCLUDED. The photos of the Three are of the N scale build the other is the HO...

This Track side shed is based on one found on the Illinois Central in the Levee yard in new Orleans but is similar to sheds found on all railroads from the late 1800’s on and can still be found today...

A small rural barn that can be found most anywhere. Kit includes the lean-to, foundation, signs for the poultry end, and a stencil for the Mail Pouch sign. All other material to built it but Glue a...

You used to find small factories like this in lots of towns sitting trackside. Harris Door was started after the first world war and survived the depression by adding more lines of wood working. When...

The Courter Factory was built in Cobleskill NY in 1866 and over the years had many uses. The building was used by Stanton Courter as part of his lumber and manufacturing companies. By the 1920’s it...

A run down, falling down Garage with outside bracing holding it up. Kit includes interior stud framing, Exterior siding and engraved nail holes, siding cut out to expose the framing, laser cut...

These little shacks were used by Weyerhauser at their McDonald-Vail camps. They had built over 90 of them. After the end of Railroad logging they were used as crossing shacks and storage shacks. Kit...

This car was made to replicate a abandoned passenger car that has seen much better days. These can still be found in yards or on abandoned lines.

Kit includes 1/8 inch thick laser cut and engraved walls, interior trusses, metal standing seam roofing. Footprint: 5.5 ” x 7.5”.

Reminiscent of the early days of railroads the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the features seen on many of the short lines, logging bases, and mines...

Covers 18 square inches.

Kit comes with 32 posts and enough strip wood rail for a fence of between 19 and 25 inches long, depending on post spacing. That is between 250 and 330 scale feet.

This would look great around that hot tub or the back yard on any house. You get 4-24 foot sections for 96 scale feet.

A road side stand that can be used any were in any era. You will find many uses for this little building. Includes interior display cabinets plus a downloadable interior framing sheet by Clever...

Is one of many built to a standard design in Southern Ontario, Canada around the turn of the century. The last one used was in Cheltenham and was replaced in the late 1950's. So this station can be...

This Building is based on the original Eating house on the C&S at Forks. Built in the 1890’s and based on drawings in Harry Brunks book Up Clear Creek. Footprint 1.75” x 3.25”.

One of the 5 structures in our new complex of kits. With a foot print of 5" by 5" this makes for a main industry. It includes 2 different roof signs, laser cut plywood walls, laser cut widows and...

A small structure based on a design by Paul Templar. Has Saloon doors and all signs as shown.The saloon is named for the husband of one of my co-workers that has cancer and could not find a Saloon...