Lighting

With the digital LED interior lights from ESU, you can retrofit your N, TT or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit the desired location. The digital interior lights are 264mm long, 9mm slim and...

With the digital LED interior lights from ESU, you can retrofit your N, TT or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit the desired location. The digital interior lights are 264mm long, 9mm slim and...

Our current pick-ups (50707) provide optimal electrical contact in all commercially available coaches and are easy to install: simply glue them to the underside of the bogie so that the pre-tensioned contact strips touch the inside of the wheels (wheel...

Our current pick-ups (50707) provide optimal electrical contact in all commercially available coaches and are easy to install: simply glue them to the underside of the bogie so that the pre-tensioned contact strips touch the inside of the wheels (wheel...

Small modules that can easily be installed either in cabs or as end-of-train lights make fitting protypical lighting of your vehicles a simple task. They provide two red LEDs including the needed electronics.

Small modules that can easily be installed either in cabs or as end-of-train lights make fitting protypical lighting of your vehicles a simple task. They provide one warmwhite LED  including the needed electronics.  

The 380mm long, 15mm wide coach interior lighting strip with the part number 50703 is intended for installation in 1 gauge models. It is equipped with both white and yellow LEDs that can be separately dimmed. Thus,for the very first time, you are able to...

The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars. We are offering two versions: The version with Part number 50700 is equipped with warmwhite LEDs, while on part number 50702 we installed yellow LEDs...

The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars. We are offering two versions: The version with Part number 50700 is equipped with warmwhite LEDs, while on part number 50702 we installed yellow LEDs...

The Circuitron Gate Driver Circuit may be used in conjunction with any of our Detection Circuits and Alternating Flashers. It is designed to directly drive up to two Tortoise(TM) Slow Motion Switch Machines when used as the actuator(s) for Grade Crossing...

Which fiber to use? The 1.5mm diameter fiber is the usual first choice in developing your lighting system. This is because it is 2 1/4 times brighter than the 1.0mm diameter fiber and, therefore, typically provides the right lighting for a house on...

This fiber is suitable for applications such as car lights, lighting in trees or others that you can imagine. Compared to a 1.5mm fiber the 0,75mm fiber will provide only 1/4 of the amount of light per fiber, but that is more than adequate for...

Which fiber to use? The 1.5mm diameter fiber is the usual first choice in developing your lighting system. This is because it is 2 1/4 times brighter than the 1.0mm diameter fiber and, therefore, typically provides the right lighting for a house on...

Which fiber to use? The 1.5mm diameter fiber is the usual first choice in developing your lighting system. This is because it is 2 1/4 times brighter than the 1.0mm diameter fiber and, therefore, typically provides the right lighting for a house on...

Which fiber to use? The 1.0mm diameter fiber is ideal for street lamps. This is the one that we incorporate into the Dwarvin lamps.  Some customers want to create their own lights, for which this fiber is the most recommended.  This size...

Output 12V DC, 1 Amp Screw-In Terminal Adapter Included Operates Multiple Vehicles and Accessories

The East Coast Circuits Crossing Signal Circuit is designed specifically for crossing signals without gates. It works with any LED crossing signals designed with common-anode circuitry. This circuit is part of the line of East Coast Circuits HO...

**Click to View Instructions**

**Click Me To View Instructions**

**Click Me To View Instructions**