Description
The ideal power supply for the SwitchWright, this unit is well-regulated and current protected. The unit has a barrel connector that fits the adapter below or you can cut it off and strip the wires. It can support about 30 SwitchWright switch machines. 115V (US) input only (not suitable for 230V).
DPS005 $16.95 USD
Input: 90-132 VAC 60Hz
Output: 5VDC @ 4A
Specifications/Features: Switching plug supply with overvoltage & current limit protection. Non-Polarized 2 blade input. 6ft output cord with 10mm X 5.5/2.1mm ID Right Angle coaxial plug Center +. UL/canada/usa/listed. RoHS compliant .
H: 3-3/8" W: 1-1/2" T: 2-1/4" WT: .3
Output: 5VDC @ 4A
Specifications/Features: Switching plug supply with overvoltage & current limit protection. Non-Polarized 2 blade input. 6ft output cord with 10mm X 5.5/2.1mm ID Right Angle coaxial plug Center +. UL/canada/usa/listed. RoHS compliant .
H: 3-3/8" W: 1-1/2" T: 2-1/4" WT: .3
|
Here is how you can use a SwitchWright to drive a second slave unit (made up from SRV002 and SWR001 on the Servos & Accessories page) and power a crossover. Press a single button or issue a single DCC command to run both turnouts of the crossover at once.
|
|
Details
Store Location: |
P# 253 / Aisle 13C #2307 |
Scale: |
Multi Scale |
