Description
You can often reverse your servo throw direction by turning it around or reversing the servo linkage. Sometimes there just isn't room under a turnout to do this. You can't reverse the servo direction by swapping wires since servos work by varying the pulse width and reversing the wires will just disconnect off the servo. In cases where you want to reverse the servo rotation direction, this servo reverser comes in handy. If you put this in line with the servo it will swap the two ends about the center. [It works by mirroring the pulse around 1.5 ms which is the center on a servo. I.e. if a 2 ms pulse is input, the reverser will output 1 ms and if a 1 ms pulse is input it will output a 2ms pulse.]
| Servos and Accessories |
Servos, mounting brackets, extension cables, Y cables and reversers and parts to make working with servos easier. As well as the servo decoders on the Tam Valley Depot website, all of the servo products on this page work with all R/C servo controllers including Arduino and other brands of servo controllers (Adafruit, sparkfun, pololu and so forth).
|
Most of our boards come with enough jumpers for normal use. However, these little guys have a way of disappearing and so customers often need more so we are now offering this small 10-pack for your convenience.
Details
Store Location: |
P# 253 / Aisle 13C #2411 |
Scale: |
Multi Scale |
