Tam Valley Depot NBZ001 - No-Buzz In-Line Servo Quieter - Multi Scale

Sometimes a servo will buzz or chatter continuously.  Some poeple find this very annoying. The No-Buzz goes in line with the servo cord and quiets the servo.  Here is how it works - if the servo is stopped in the same position for more than about a second the circuit turns off the servo. If the servo starts moving again it will turn it on and drive the servo until it stops again.  When the servo is stopped the gears will hold most switches in place. A side benefit of the No-Buzz is that you do not need to adjust the servo as precisely but can overdrive the position and let the servo relax back after it turns off.

Note: The No-Buzz circuitry is built-in to the Octo III, the Micro Singlet and the Switchwright Board so this is not needed if you use them.

Servos and Accessories

Servos, mounting brackets, extension cables, Y cables and reversers and parts to make working with servos easier. As well as the servo decoders on the Tam Valley Depot website, all of the servo products on this page work with all R/C servo controllers including Arduino and other brands of servo controllers (Adafruit, sparkfun, pololu and so forth).