Description
|
Fascia Controllers
Crossover Fascia Controller
3D printed mount for fascia controllers
|
The Fascia Controller plug in to our servo controllers to provide an easy way to control your turnout. Skill Level: Basic - simply plug in to board (micro singlet, SwitchWright, Octopus, Quad-PIC and QuadLN_S) |
12" Y-cord
The Y can can also be used with the fascia controllers to provide two control points for one switch (For Octo III the Mntry jumper must be on).
The Y can can also be used with the fascia controllers to provide two control points for one switch (For Octo III the Mntry jumper must be on).
Y cables can also be used to attach two servos to one output. Both servos will move in the same manner at the same time. (Note: some users have had trouble getting this to work with some servo types).
A third use is to connect a DPDT relay and a fascia controller to the same control input (NOT a servo output) so that a relay and a fascia controller can be used at the same time.
Details
Store Location: |
P# 253 / Aisle 13C #2509 |
Scale: |
Multi Scale |
