Bachmann

Nickel silver track with gray roadbed; 2/cardThese bumpers properly finish the ends of your track spurs.

Nickel silver track with gray roadbed; 1/boxConnects parallel tracks, allowing equipment with longer wheelbases to cross over smoothly and at higher speeds. Note: All analog turnouts (non-DCC)...

Nickel silver track with gray roadbed; 1/boxConnects parallel tracks, allowing equipment with longer wheelbases to cross over smoothly and at higher speeds. Note: All analog turnouts (non-DCC)...

Nickel silver track with gray roadbed; 1/cardLonger and with a wider radius turnout than the E-Z Track® Remote Switch - Right, the #6 Turnout - Right allows for smoother transitions between...

Nickel silver track with gray roadbed; 1/cardLonger and with a wider radius turnout than the E-Z Track® Remote Switch - Left, the #6 Turnout - Left allows for smoother transitions between...

Nickel silver track with gray roadbed; 1/cardThe 90 Degree Crossing has many useful applications in railroad design. However, if your goal is to make a “Figure 8” layout, you should start...

Nickel silver track and gray roadbed; 4/cardFour pieces of track are the equivalent of one and one-third sections of 18” Radius Curved E-Z Track®. They are designed to provide layout...

Nickel silver track and gray roadbed; 4/cardFour pieces of 2.25” track are the equivalent of one section of 9” Straight E-Z Track®. They are designed to provide layout...

Nickel silver track and gray roadbed; 4/cardFour pieces of track are the equivalent of one and one-third sections of 9” Straight E-Z Track® They are designed to provide layout...

Nickel silver track and gray roadbed; 4/cardFour pieces of 9” Straight Track build 36” of railroad.

Nickel silver track and gray roadbed; 1/cardThe terminal rerailer is connected via terminal wires to a power pack, which provides current to power the layout. In addition to making power connections,...

Nickel silver track with gray roadbed; 4/card18” Radius Curved Track is the basic curve of the E-Z Track® system. It can also be placed on the inside of 22” radius...

This 10' Power Extension Wire is used to make plug-in connections from your existing Bachmann power pack terminal wire to an E-Z Track® Terminal Rerailer or switch controller. Its ample...

Bachmann's Plug-in Power Wire - Red is a replacement wire for power connections between Bachmann-brand speed controllers and train set track systems.

Steel alloy track with black roadbed; 4/cardFour pieces of 9” Straight Track build 36” of railroad.

Steel alloy track with black roadbed; 1/cardThe terminal rerailer is connected via terminal wires to a power pack, which provides current to power the layout. In addition to making power connections,...

The Bachmann 16V DC Multi-Accessory Power Supply allows you to power up to six powered accessories up to a one-amp load (instruction included with most accessories tell how much current they use in...

4 per pack designed for use with HO and On30 locomotive drivers (can also be used for non-drive wheels) full electrical pickup perfect for workbench testing

Handy tool for your model railroad. 4 magnetic clamps with 16 magnets. (Suggested use shown; glue not included)

Glue ballast the easy way with this handy tool.