HO Scale Track and Accessories

HO Scale #7 Left Hand Curved Turnout Code 83 Insulfrog

HO Scale #7 Right Hand Curved Code 83 Insulfrog

Peco SL-8352 Code 83 #5 Left Hand Turnout (Insulfrog) - HO Scale New Peco Code 83 track components are based on American Railroad Engineering Association drawings, and have been designed to meet NMRA standards. This line of track is an all-new addition...

Peco SL-8351 Code 83 #5 Right Hand Turnout (Insulfrog) - HO Scale New Peco Code 83 track components are based on American Railroad Engineering Association drawings, and have been designed to meet NMRA standards. This line of track is an all-new addition...

HO Scale #4 Wye Turnout Code 83 Insulfrog

Peco SL-8340 Hayes' Bumper Stop your rolling stock from rolling off the end of your sidings. These bumpers are the type found in many industrial districts. Add a bit of realism and safety to your track work.

Makes re-railing steam locos and bogie vehicles simple. Length of unit, 313mm (12 5/16in).

DecouplerType A/HD for Sinplex/ Hornby/ Dublo - HO Scale

The Code 70 system can be connected directly to the Code 83 system by using the new SL-115 Transition track, that ensures a smooth transition from one rail type to the other without any noticeable change. PECO Transition Track Code 83 to Code 70 4pcs

PECO SL-113 For use between sections of Code 100 and Code 75 track, so for example could be used to incorporate a Code 75 Asymmetric 3- way Turnout (SL-E199) into a Code 100 layout, or to connect a Code 100 Streamline or Setrack 'fiddle yard' to a Code...

Insulated Rail Joiners suitable for code 70/75/83 Peco Streamline

Metal Conducting Rail Joiners suitable for code 70/75/83 Peco Streamline

Insulated Rail Joiners suitable for code 100 Peco Streamline

Metal Conducting Rail Joiners suitable for code 100 Peco Streamline

Peco PL-34 Wiring Loom for Turnout Motor (for use with PL-10 series) (SCALE=ALL ) PECO Multi Scale Wiring Loom for Turnout Motor (for use with PL-10 series)

Houses 6 PL-26 Passing Contact Switches, PL-22 On/Off Switches or PL-23 On/On Switches. Recommended to be used with: PL-26 Passing Contact Switches PL-22 On/Off Switches PL-23 On/On Switches PECO Multi Scale Switch Console

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these switches without soldering; the included Shrouds prevent...

Attaches directly to the PL-10 family of Turnout Motors with contact adhesive. This single pole switch can control frog polarity, ground signals etc. PL-31 Spade Connectors can be used to attach wires to these units without the need for soldering. ...

Description Switch Machine extended drive pin. Designed for use with PL-9 mounting plate. Use this if you do not wish to cut a large hole in your baseboard. Drill a hole, 9.5mm (3/8") through the baseboard beneath the center of the tie bar.

Switch Machine for use with Peco Streamline and Peco Setrack. The most reliable, discrete and simple method is to clip one of these directly to the underside of a Peco turnout.