N Scale

Kit contains enough 5 foot scaffolding sections and braces to do a 30 ft. high by 70 ft long wall. 24 sections of 5 ft. by 5 ft. frames. 50 sections of bracing and 50 double wide planks.

Kit contains Laser cut wood parts and Grandt Line detail parts to make one tank and tower. Pump house is included. Footprint: 1-1/4” by 1-1/4”.

Kit contains 12 - 40 Foot Span Trusses with a 4/12 Slope.

Kit contains 8 - 60 Foot Span Trusses with a 4/12 Slope.

You get 12 - 24 foot wood trusses, 12 sheets of T-111 siding and 16 sheets of plywood, two 16 ft ladders plus as an added bonus 3 saw horses.

A road side stand that can be used any were in any era. You will find many uses for this little building. Includes interior display cabinets plus a downloadable interior framing sheet by Clever...

A small Gambled roofed barn as found on many Farms around the country. This design is ageless and has been used since the mid 1800’s. Footprint - 2 9/16” x 4 1/2” for the base.

Contains laser cut laser board walls, Laser board windows and doors. plus Fire escapes. Footprint: 2.25” x 3.0”

Jeff's (home of the best Burger in town) is a small road side stand that is modeled after one near Salem, OR and will fit in most any era and has many uses. Kit included Tichy and Grandt Line parts...

Based on a store in Jefferson Oregon. Footprint: 1 1/4” x 2”

The freight house at the crossing of the Mono and Nickel Plate Railroads at Linden Indiana. Footprint: 3 3/8” x 4 1/4“

Walls are laser cut bass wood with Tichy windows and doors, laser cur basswood dock framing with a ply deck with engraved nail holes. Set of laser cut stairs and assembly jig. Footprint: Building - 1...

The original Keystone Mill was built in the late 1900s and still stands today as a lumber yard in Pennsylvania. Each kit features a foundation cast by Motrak, board-on-board laser-cut siding, and...

Wood Truss Rod Bridge (55' Span)

Randolph Depot RslaserKits Craftsman Laser Cut Kits. Like all craftsman kits these are unfinished and will take sometime to build and finish.The perfect station for any railroadThis kit has been...

Comes with doors as shown, plus a new roll-up door. Makes it suitable for any era layout. Footprint 1" x 2".

This Building is based on the original Eating house on the C&S at Forks. Built in the 1890’s and based on drawings in Harry Brunks book Up Clear Creek. Footprint 1.75” x 3.25”.

Is one of many built to a standard design in Southern Ontario, Canada around the turn of the century. The last one used was in Cheltenham and was replaced in the late 1950's. So this station can be...

Here's a structure found on every railroad in any town. Little loading docks like these have been used since the start of railroading and are still in use today. They service the industries that do...

A small structure based on a design by Paul Templar. Has Saloon doors and all signs as shown.The saloon is named for the husband of one of my co-workers that has cancer and could not find a Saloon...