N Scale Signaling

This kit will build a single Searchlight Signal in several different configurations. Parts are included to make a Single, Double or Short Dwarf signal on a pole mount.--- 5-9 - Price each = 10.95--- 10 or more - Price each 9.95--- (multiple kits packaged...

This signal can be built static or operational using the micro tri-color LED. The N Scale signal head measures 0.155" high by 0.079" wide (that's just the head not mounted). The dwarf signal target background is used in areas where it"s harder to see the...

The pole relay is a very common site along railroads. That is why we include six per package. This highly detailed pole relay can add additional realism to your layout. From the Concrete base to the bolted down cast iron base flange the pole stands with...

The GRS style relay cabinets can serve well for heavy relay signal support. Two separate models can be made from the parts included. They can be configured with the doors open or the doors closed, with the mast and weather head on or instead with the cap...

The two door relay cabinets can serve well most anywhere when heavy relay signal support is needed. Two seperate models can be made from the parts included. They can be configured with the doors open or the doors closed, with the mast and weather head on...

These relay cabinets can serve well most anywhere when relay signal support is needed. Three separate models can be made from the parts included. They can be configured with the door open or the door closed with the mast and weather head on or instead...

Contains one set of non functional crossing gates design to fit our RRA-3004 Crossing Signals. Osborn Models N Scale Crossing Gates Only

Contains one set of non functional crossing signals Includes US and Canadian signage. Osborn Models N Scale Crossing Signals

Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already have signals installed on your layout. Simply run the...

N scale Turnout Signaling Kit including:  1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic N...

N scale Mainline Signaling Kit including: 2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws. Makes all of your signals plug ‘n play with small 10 pin connectors. Can be used as a basic N scale signal. Mounting...

Under layout mounting hardware for Signal Driver Cables and their sockets. 6 metal signal straps and 6 signal spacers. These handy bits of hardware hold your signal plugs at just the right distance from the layout to make it easy to plug in your signals.

Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts.

Use with the Tortoise Switch Machine and an upper or lower quadrant semaphore-style signal.  Includes al the logic circuitry to drive the signal to all three positions. Works with BD-1 or BD-2 Block Occupancy Detectors. A minimum of two blocks must...

The CIRCUITRON DT-3 Single Direction Grade Crossing Detection Circuit utilizes our proven OptoElectronic Detection and will provide accurate grade crossing action for a single locomotive or a 100 car train. There are absolutely no modifications to...

CIRCUITRON designed the DT-2 to be the most advanced DC track power grade crossing detection circuit available at any cost. It is completely independent of train length and it will duplicate prototype grade crossing action for a single locomotive or a...

The CIRCUITRON DT-1 is a bi-directional detection circuit designed for DC track power that provides an output whenever one of its Opto-Sensors is covered by a piece of rolling stock. Absolutely no modifications to the rolling stock are necessary. 4...

The CIRCUITRON FL-2 is designed to be controlled by the output from one of our Grade Crossing Detection circuits. The FL-2 may also be easily wired for continuous flashing or for manual control with a panel switch, if desired. Only one FL-2 is needed per...

  FEATURES: Based on Common Prototype Signals Durable Construction Completely Assembled Operating Signal Heads Extremely Accurate Design These extremely accurate HO Scale models were developed from prototype measurements and...

  FEATURES: Based on Common Prototype Signals Durable Construction Completely Assembled Operating Signal Heads Extremely Accurate Design These extremely accurate HO Scale models were developed from prototype measurements and...