RslaserKits

N-scale T-trak double straight module. These measure 24 5/16 by 13 inches. The kit includes all parts to build one module less track and glue. Includes 3 laser cut track locating jigs 4 2-inch nylon...

A small rural barn that can be found most anywhere. Kit includes the lean-to, foundation, signs for the poultry end, and a stencil for the Mail Pouch sign. All other material to built it but Glue a...

Kit contains 25 - 3'0" x 6'8" Doors and Trim.

Kit contains 9 - 12x14 Service Doors Glass Panel.

Pre-colored Slate roofing. One sheet with 34 square inches of roof cover.

Paper laser cut Corrugated metal sheets, Brown in color. Each kit has 2 sheets that have 80 sections of metal. These sections are a scale 40 inches by 13 feet and each sheet covers 17square inches of...

The perfect solution for all those building with no foundations. Each pack contains 6 eight inch long by 5/32 inch square sticks engraved on one side with a stone pattern. Each stick is a scale 25...

Sheets are true scale size 2x8 wood form section in a running bond. Can be used for foundations, retaining walls and portals, any were concrete has been formed when poured. Sheets cut from laser...

A wood deck for Atlas 3800 Series 50 ft flat cars. The kit includes laser cut micro plywood and laser board parts with 3-M peal and stick backing for a easy no glue conversion. If you don't need or...

A wood deck for Micro Trains 45000 Series 50 ft flat cars. These include the new Military and Ringling Brothers cars and others. The kit includes laser cut micro plywood and laser board parts with...

Each kit contains 12 laser engraved shelves that are a scale 8 foot high by 10 foot long and 10 inches deep. These come unpainted and need to be finished. Note: For the photos, the shelves were...

This kit has the parts for 9 lumber stacks. Each stack is 4 scale feet wide and 30 inches tall. Each stack is made from 6 layers of 1/32 Basswood colored Taskboard and have staggered ends , with the...

Kit contains 7 - 18 foot ladders.

Stair case with hand rails 3 per kit includes a assembly jig. Designed so they can go in any direction from building.

The kit has parts to make one flat car or gondola. The price is less trucks and couplers. It takes Micro trains trucks with short extension couplers.

N Scale T-trak bridge drop module the measures 12 1/8 by 14 inches with a 2 in drop in the center. The bridge module is set up for using the Kato 20-40 or 20-45 sections on the ends and either the...

Simple to build and lightwieght, these are the ideal module to get started in T-Track or model railroading in general. Made from 1/8th" plywood with tab and slot construction, the only tool needed to...

Simple to build and lightwieght, these are the ideal module to get started in T-Track or model railroading in general. Made from 1/8th" plywood with tab and slot construction, the only tool needed to...

A small branch-line engine house or car shed. Will fit a GP-38 or 50 ft cars. Or use a as a heavy equipment repair building. Our weathered printed paper siding is supplied as shown. Foot print f 3 x...