Description
This 17mm x 12mm speaker is a tough little beast capable of pumping out 1 Watt of clear and accurate audio. This speaker was hand-picked by TCS to be used in the Bachmann N-scale Siemens Charger locomotives. Truly an impressive speaker in a small package!
This speaker also comes from TCS with 4-inch (100mm) long twisted pair 32AWG wire factory-installed.
Important Safety Note When Using This Speaker:
TCS WOWSound decoders use an audio amplifier capable of supplying up to 2 Watts of power to an 8 Ohm load at maximum volume. The amplifier(s) on a WOWSound product can support speakers with impedance ratings as low as 4 Ohms. A reduction in impedance will result in a more power (more Watts) being supplied to the speaker. This speaker is rated at 8 Ohms of Impedance and 1.0 Watts of continuous power. (See "Specs" for more details) It is recommended that you set your master volume to ~50% or less to prevent over-driving and damage to your decoder or speaker.
Dimensions: 0.67" x 0.47" x 0.09" or 17mm x 12mm x 2.25mm
Sound Pressure Level: 95 dB ± 3.0 dB at 1.0W, 10cm, 2.0 KHz.
Effective Frequency Band: 870 Hz. to 20,000 Hz.
Power Rating: 1.0W (Nominal) 1.5W (Short-term Peak)
DC Impedance: 8 Ω ± 20 % at 1.0W 2000 Hz.
Details
Scale: |
Multi Scale |
