Digitrax

 RD2 Remote Sensing Diodes for BDL16 series occupancy detectorsRemote sensing of 2 detection sections. Eliminates the need for long runs of heavy gauge wire between the BDL168, BDL16 &...

  Keeps locos running during power interruptions caused by dirty or bad track. Keeps light and other functions from dropping out due to power interruptions. Hold up time varies based on...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. PX112-2 Plug ‘N Play Install...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness 8 ohm 10x18 mm Oval speaker included. Keeps locos running during intermittent power interruptions resulting from...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness 8 ohm 16 x 26 x 9 mm box speaker included Keeps locos running during intermittent power interruptions...

  For use with Digitrax Decoders Equipped with 2 pin PX socket or solder pad connections Keeps locos running during intermittent power interruptions resulting from dirty or bad track. ...

 PS615 90W AC/DC 15VDC 6 amp power supply for use with all Digitrax Command Stations and Boosters operating at 5 amps. High-efficiency power supply 15 VDC output Accepts different cord...

 The PS14 is a 300ma, 14 Volt power supply for powering Digitrax accessories like the UP5, BDL168, DS64, SE8C, LNRP, UR90, UR91 UR92 and others  Universal AC input 95-240V 50/60Hz ...

 The PR4 makes decoder programming and interfacing your layout and computer easier than ever. The PR4 seamlessly switches between computer interface and decoder programming modes automatically...

 It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack, and a 100 Ohm 2 watt protection resistor. LT1 Features: Use as...

 The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. The apps available can be downloaded from this page. Wi-Fi interface to a...

Everything you need to get started with Advanced Digitrax Command Control.   Evolution Express is perfect for most home and club layouts wanting Duplex Radio control out of the box.  It...

Everything you need to get started with Advanced Digitrax Command Control. Evolution Express is perfect for most home and club layouts. It offers excellent speed control, prototypical consisting,...

Fits Many DCC-Ready Z, N and HO Scale Locomotives Size: .55” x .4” x .148”14mm x 10.23mm x 3.77mm Z/N/HO Scale 1.0 Amp/1.5 Amps Peak 4 FX3 Functions, 0.5 Amp DCC Medium...

Series 6 Features 4 FX3 Functions .386” x .559” x .137”9.8mm x 14.2mm x 3.48mm Fits Many N and HO Locomotives

Wired Motor & Function Decoder that fits many N and HO Scale Locos. Size: .55” x .4” x .148”14mm x 10.23mm x 3.77mm Z/N/HO Scale 1.0 Amp/1.5 Amps Peak 4...

All the great features and reliability of Digitrax decoders in a tiny package that will fit almost anywhere! 0.55" x 0.28" x 0.128" (14 x 7.13 x 3.25 mm) Works with Z, N, and HO scale locos 1...