Electronics

For Intermountain N scale FT A units with motor contact "shoes" 6 FX3 Functions .472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mm Replaces DN163I1A   ▪FX3 Function outputs for prototypical...

For Intermountain N scale FT B units with motor contact "shoes" 6 FX3 Functions .472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mm Replaces DN163I1B   ▪FX3 Function outputs for prototypical...

  Replaces DN163A2 Board Replacement Decoder for Atlas N Scale GP7, GP9 and GP15-1, GP30, GP35 and similar locos Decoder Lock equipped

 Wired Motor & Function Decoder that fits many N and HO Scale Locos. Size: .55” x .404” x .2” 13.9mm x 10.3mm x 5 mm N/HO Scale 1.0 Amp/1.5 Amps Peak 3 FX3 Functions, 0.5 Amp FX3 Function o

 Fits Many N/HO Locomotives with 8 pin Medium Socket Size: .55” x .404” x .2” 13.9mm x 10.3mm x 5 mm N/HO Scale Digitrax Easy Connect 8 Pin Harness 1.0 Amp/1.5 Amps Peak 3 FX3 Functions,...

 Features: DN143K2 makes installation possible though it is somewhat challenging because of the model itself. If you use reasonable care, you will be able to handle this installation. RDC...

 Fits Many DCC-Ready N and HO Scale Locomotives Size: 1.158” x .386” x .115” 29.43mm x 9.81mm x 2.98mm N Scale 1.0 Amp/1.5 Amps Peak FX3 Function outputs for prototypical lighting effects...

 Digitrax 9 pin to DCC medium plug short harness (1”)

  Digitrax LocoMotion™ System Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!Torque Compensation for smooth as silk silent...

 BXP88 makes adding detection and transponding to your layout easier than ever.  No more complicated wiring! DCC Occupancy Detection supports up to 8 Detection Sections letting you know when...

 The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power manager. It is designed to make transponding implementation easy and provide advanced...

Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability) Up to 8 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play...

Dual 3/5/8 Amp AutoReversing DCC Booster Up to 16 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system...

 Decoder Wire for decoder, lighting & signal installation 90ft 32AWG stranded wire-10 ft lengths in 9 colors

 AR1 Features: Cost effective automatic reversing for one reversing section or subdistrict User selectable trip current lets you adjust the AR1 to work with any scale or equipment on your...

  Low-cost, High-sensitivity DCC block-occupancy detection. Adjustable resistance/current detection section (DS) trip threshold. 8A capacity, suitable for all scales and track wiring...

Ideal for constant lighting source in unpowered rolling stock. No ballast lamps or motors required. Will power Mars flasher in models driven by low current can motors. Works with all forms of track...

This Bowser - Stewart Speaker Enclosure is just the thing for adding sound in your Bowser, Atlas, Fox Valley and other diesels. Speaker enclosure comes with two 11x15mm, 8 Ohm impedance, sugar cube...

The Bachmann 16V DC Multi-Accessory Power Supply allows you to power up to six powered accessories up to a one-amp load (instruction included with most accessories tell how much current they use in...

This control provides the simplest way to wire and control tricky reverse loops, wyes, and turntables. It has reversing switches for two mainline cabs plus a switch, selectable by either cab, for...