Electronics

Round 13mm 8 Ohm Speaker with wires. Fits many N & HO Scale installations.Used on current production SDN144K0A and SDN144K1E sound decoders. Digitrax recommends the use of a baffle or speaker...

Ready to install in compatible locomotive motherboards 26.5mm X 15.5mm X 9mm Rated at 8 Ohm Rated at 1/2 Watt

Ready to install in compatible locomotive motherboards 26.5mm X 15.5mm X 9mm Rated at 8 Ohm Rated at 1/2 Watt  

  Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.   Use this kit to make signal driver cables to connect your SE8c to the...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance Use on...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 10...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. PX112-2 Plug ‘N Play Install on DH126 &...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 6...

  Keeps locos running during power interruptions caused by dirty or bad track. Keeps light and other functions from dropping out due to power interruptions. Hold up time varies based on...

 RD2 Remote Sensing Diodes for BDL16 series occupancy detectorsRemote sensing of 2 detection sections. Eliminates the need for long runs of heavy gauge wire between the BDL168, BDL16 & BDL162 and...

 The PR4 makes decoder programming and interfacing your layout and computer easier than ever. The PR4 seamlessly switches between computer interface and decoder programming modes automatically...

 The PS14 is a 300ma, 14 Volt power supply for powering Digitrax accessories like the UP5, BDL168, DS64, SE8C, LNRP, UR90, UR91 UR92 and others  Universal AC input 95-240V 50/60Hz  US 2 prong...

 PS615 90W AC/DC 15VDC 6 amp power supply for use with all Digitrax Command Stations and Boosters operating at 5 amps. High-efficiency power supply 15 VDC output Accepts different cord sets ...

  For use with Digitrax Decoders Equipped with 2 pin PX socket or solder pad connections Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness 8 ohm 16 x 26 x 9 mm box speaker included Keeps locos running during intermittent power interruptions resulting from...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness 8 ohm 10x18 mm Oval speaker included. Keeps locos running during intermittent power interruptions resulting from dirty or...

Everything you need to get started with Advanced Digitrax Command Control. Evolution Express is perfect for most home and club layouts. It offers excellent speed control, prototypical consisting,...

Everything you need to get started with Advanced Digitrax Command Control.   Evolution Express is perfect for most home and club layouts wanting Duplex Radio control out of the box.  It offers...

 The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. The apps available can be downloaded from this page. Wi-Fi interface to a Digitrax...

 It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack, and a 100 Ohm 2 watt protection resistor. LT1 Features: Use as a diagnostic...