PECO

Use these when creating a diagrammatic control panel to clip fit PL-26 Passing Contact Switches, PL-22 On/Off Switches and PL-23 On/On Switches in the required place. PL-26 Passing Contact...

Allows adjacent switches in the PL-27 Switch Console and PL-50/51 Switch Module Unit to be ganged together and operated simultaneously. PL-26 Passing Contact Switches PL-22 On/Off Switches PL-23...

Single Pole On/On Switch. Use this to switch power from one device to another or for operating items such as 2 aspect colour light signals. PL-27 Switch Console Unit PL-28 Switch Mounting Plates

Use this switch to control the polarity on the N Gauge Code 55 SL-E383F Scissors Crossover. See Shows You How Booklet Wiring the Layout No 21 for a comprehensive colour coded diagram. SL-E383F N...

Clip this unit either side of an insulation gap on Peco H0/00 track. This can be used to isolate a loco at the end of a terminal road or siding, thereby enabling another loco to take the stock out...

This unit enables a PL-10 Turnout Motor to be mounted on the surface of the baseboard, an optional extension arm is also included. A removable over centre spring is fitted, useful for turnouts which...

TwistLock a basic electric solenoid motor, for operating (in the main) turnouts. It is powered by a normal 16vAC supply (and can take up to 3 amps) and is fully compatible with all PECO turnouts up...

Set-up is easy: all connections to the SmartSwitch board simply plug together or attache to screw terminal blocks. Programming is easily done using the detachable servo programming board, and full,...

Please note: Image shows Electrofrog version PECO Streamline OO/HO CODE 100 Curved Turnout, Small Radius, Left Hand Adapted from the existing PECO Setrack Curved turnout, this brand¬†new...

Please note: Image shows Electrofrog version PECO Streamline OO/HO CODE 100 Curved Turnout, Small Radius, Right Hand Adapted from the existing PECO Setrack Curved turnout, this...

If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run...

  For use with all solenoid motors (e.g. PL-10 and Pl-11). Connect this unit to the 16v ac supply on your transformer. The capacitor stores up power and discharges a 'kick' to ensure turnout...

Non-indexing turnatable motor (which means that there are no pre-set or programmable settings) means that the modeller can simply line up the deck against the exit or entrance road by eye, and the...

 This fits directly to the PL-10 family of Turnout Motors. The 2 single pole changeover switches can be used to control polarity, route selection diagrams, or 2 aspect colour light signalling...

 PECO Streamline transition track for connecting Code 83 and Code 100 track. Length: 914mm

Keep your wiring organised and tidy with these self adhesive clips. Pack of 20 clips

PECO STREAMLINE N CODE 55 3 WAY TURNOUT, MEDIUM RADIUS The 3 way turnout is an ideal way to save space on station approaches, junctions etc. Despite a low visible rail height of just 1.4mm, all...

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these...

Multi Scale. Use with all Peco Track products.

Double unit loco lift. Designed as a replacement for the old SL-43 Loco Lift, this new versatile system still has the features that made the SL-43 so popular, such as the ability to directly drive...