Electronics

This tiny speaker has a high-output and works well for N-scale and larger models. Dimensions: 15 x 3.5mm(D)Frequency Response: 780Hz - 15kHzPower: 0.3 Watt (Nominal) 0.5 Watt (Peak)Impedance: 8 Ohms

Great sound for your train if you can fit this one in your model! Dimensions: 40 x 28.5 x 11.3mm(D)Frequency Response: 250Hz - 20kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

Replacement 9-wire to JST power harness for all TSU-2200 or ECO-200 Digital Sound Decoders.

This tiny, high-output speaker is suitable for N-scale and larger models. Dimensions: 20 x 4.2mm(D)Frequency Response: 750Hz - 9kHzPower: 0.5 Watts (Nominal) 1 Watt (Peak)Impedance: 8 Ohms

These 2-pin connectors allow locomotive wiring to be quickly disconnected for easier painting and servicing. This kit includes a 2-pin connector set, 6" of red wire, 6" of black wire, and four pieces of heat-shrink tubing.

The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple added features. This mother board does not include the 21-Pin Decoder. This mother board requires soldering. This printed circuit board is NOT INTENDED FOR USE IN...

Part Number5240298 Dimensions100ft of 10mm (.393) NCEKAP10 100ft of 10mm (.393) Kapton Tape Polyimide Film Tape consists of Kapton® polyimide film and silicon adhesive. It is designed for high temperature applications. Temperature use range is -100...

Male Quick Connect, (Red), package of 20, 18-22AWG NCE Multi Scale Male Quick Connects 20 Pack

DCC Main Bus Wire, (Black), 14 AWG, 25 Feet NCE Multi Scale DCC Main Bus Wire Black 25'

DCC Main Bus Wire, (Red), 14AWG, 100 Feet NCE Multi Scale DCC Main Bus Wire Red 100'

DCC Main Bus Wire, (Red), 14AWG, 50 Feet NCE Multi Scale DCC Main Bus Wire Red 50'

DCC Main Bus Wire, (Black), 14AWG, 50 Feet NCE Multi Scale DCC Main Bus Wire Black 50'

Male Quick Connect, (Red), package of 32, 18-22AWG NCE Multi Scale Male Quick Connects 32 Pack

Track Bus Taps, (Blue), package of 32, 14-16AWG NCE Multi Scale Track Bus Taps 32 Pack

Same six-wire connectors in front as UTP but allows use of off-the-shelf CAT5 cables to connect panel-to-panel at rear. Can be used as a cab bus splitter and also adds the ability to add power to the cab bus for larger layouts.

The AR10 is an automatic reverse loop controller for DCC layouts. It requires just 4 connections, two to the main line and two to the loop. In addition it functions as a circuit breaker for the reverse loop. Recommended for DCC systems from 1 to 10Amps.

Build your control panels with greatly simplified wiring. Just connect push buttons to the Mini Panel and use to issue turnout routing macros, individual turnout commands by pushing one button. Set up is easy, just plug in a Pro Cab (sold separately) and...

Provides short circuit protection for one power district. Can be used with most DCC systems.  This is not recommended for use with the PowerCab. For the PowerCab use a CP6!

Add this USB computer interface for computer programming and/or operation of your Power Cab equipped layout. Requires USB cable, computer and railroad computer program such as JMRI Decoder Pro and Panel Pro

Add a separate PCP panel to operate your PowerCab in other places or on other layouts. Use the P114 and you will only have to move the PowerCab.