Electronics

1/2" wide x 36 yd. roll of Kapton tape.

3/4" wide x 36 yd. roll of Kapton tape.

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug. From M4 listing 1011 Back EMF Load Compensation: Provides superior slow speed control and high performance...

The K4D6 is a N-scale drop-in decoder specifically designed to fit the Kato N-Scale MP36PH locomotive. This decoder is also commonly paired with the K4-LK lighting kit for the MP36PH. Note: The K4D6 does not have the copper...

The T1 LED has added Blue and Black/White wires for the use of a KeepAlive device. This decoder has internal resistors for LEDs eliminating the use of external resistors for F0F or F0R. This decoder may be hard-wired or plugged directly into any...

A full featured, 4 function, 3.5" (88.9mm) harnessed decoder with a built in Keep-Alive™. The built-in Keep-Alive™ will keep your locomotive operating for 6-15 seconds without power (dirty track, bad contact, etc. etc.). Included is our...

This motherboard is designed to replace the existing circuit board in a Bachmann Baldwin J-Class 2-8-2. This board is designed with High Profile Pins to Receive a Soundtraxx or ESU decoder and provides an onboard Keep Alive® (KA4 style)...

The BA-100 “Booster Adapter” is a product which can be used to connect different manufacturers’ DCC boosters (and command stations) together. This product is intended to offer a quick and easy way to “plug and play”...

This product is an expansion panel for an LCC network, such as those created and used by the CS-105 and LT-50. Use this product to expand the number of wired throttles such as the T-50 you can connect to the TCS command station, or to provide an access...

The WOW501 is a universal, 5 Amp sound decoder for large-scale locomotives. The WOW501 includes Keep Alive® on-board for stutter-free operation. Function 5 and 6 may be programmed to control a smoke unit with a coil and fan. By programming CV58...

Intermountain and Bowser speaker housing for the TCS 35mm x 16mm oval speaker (included). This speaker replaces the existing one in the sound equipped models and DCC sound ready locomotives. This speaker kit includes two M2-.4X6 screws for...

Intermountain speaker housing for the TCS 35mm x 16mm oval speaker (included). This speaker housing is a cantilever style and is secured to the chassis via the two included screws. Dimensions: 1.62" x 0.71" x 0.28" or 41.25mm x 18mm x...

Universal speaker housing for the TCS 28mm round speaker (included). This housing has limited use because of the open back however it can be useful in some situations. It can be useful for example for mounting the speaker on the underside of a coal load...

The B-106 is an intelligently-designed DCC Auxiliary Booster with LCC integration as well as a built-in RailCom® detector. Thoughtfully designed to outperform in every area, the B-106 is the perfect for layout builders or renovators looking for a...

Welcome to TrainTraxx – Enabler of Realistic Model Railroad Operations A HiveID Company, Provider of Inventory and Tracking Solutions The TrainTraxx platform is a model railroading solution for inventory management and enables realistic model...

Speaker Enclosure for 2 sugar cube speakers. Box may be glued together or screwed together. Speakers and screws not included. 16.4mm x 35.25mm x 9.5mm 4 mounting holes for 2mm screws

Ideal for constant lighting source in unpowered rolling stock. No ballast lamps or motors required. Will power Mars flasher in models driven by low current can motors. Works with all forms of track power. Max current output is 1/2 amp. Circuitron Multi...

The CIRCUITRON LT-1 and LT-2 are interfacecircuits that allow CIRCUITRON products tofunction with other manufacturer’s productsthat require opposite polarity fromCIRCUITRON products. Both boards have 4independent logic inverter circuits on the...

The CIRCUITRON LT-1 and LT-2 are interfacecircuits that allow CIRCUITRON products tofunction with other manufacturer’s productsthat require opposite polarity fromCIRCUITRON products. Both boards have 4independent logic inverter circuits on the...

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Integrated DCC Medium Plug for track, motor and function control, allows-decoder to be moved between different locomotives Series 7 Enhanced Decoder Features 6 Digitrax FX7 Functions-Control...