Electronics

Fits Kato FP40-PH or compatible HO locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output 8 Ohm 28 mm round speaker w/330uF Capacitor

The RX4 is a 4 zone transponder detector for use with Digitrax occupancy detection systems.  The RX4 enables you to not only see what blocks are occupied but also identifies what is there. RX4 Features: Know the layout zone location of...

The LNRP Xtra LocoNet Repeater Module Isolates and Protects LocoNet Layouts, it allows for greater expansion of the LocoNet system on large installations.  If a wiring or signal problems occur on any “standard” LocoNet section that the...

Z Scale Mobile Decoder DCC Board Replacement for AZL PA1 locomotive 2 FX3 Functions Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps can also be used) Momentum with acceleration and deceleration Normal...

Lets you share decoders among locomotives 2” wires from Digitrax plug to DCC 8 pin plug Fits many HO locomotives with 8 pin socket

Lets you share decoders among locomotives 4” wires make it easy to install in N or HO 5-Pack

Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack)

Mobile Decoder Fits Next18 socket locomotives Plug-in Next18 connector Motor drive at connector capacity 6 FX3 Functions

DH165Q1 fits Atlas, Intermountain, LifeLike & Other factory sound-equipped HO Locomotives. Compatible with Digitrax Sound Bug.Decoder Lock equipped QSI-style PCB replacement Plug N’Play decoder- Allows replacement with new technology...

Features:Series 5 Decoder for Proto 2000 Plug ‘N Play Installation Compatible with Sound BugDecoder Lock equipped

DH165K1A fits many Kato HO Diesel Locomotives. Compatible with Digitrax Sound BugDecoder Lock equipped  

Fits many Kato HO legacy locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output

Features:Series 3 HO Plug ‘N Play Decoders with Integrated Plug Compatible with Sound Bug (Note this is not a plug n' play installation, wiring is required) Decoder Lock equipped

Fits Kato, Athearn Genesis, Stewart, other HO locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output

Bracket will hold: DT602, UT6 and other legacy Digitrax throttles. Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day Warranty On Materials...

Bracket will hold: DT602, UT6 and other legacy Digitrax throttles. Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day Warranty On Materials...

Make programming your locomotives CV’s easier with Broadway Limited’s CV Setter! Designed for precision and ease of use, this essential tool allows you to quickly and simply customize and fine-tune the performance of your locomotives to meet...

For wiring projects ranging from a model railroad layout to a robot to a new light fixture in the kitchen, Xuron's 501 Wire Stripper is the only tool you need. Designed to quickly and easily cut and strip both stranded and solid wire sizes from 10-30...

Fits many older Atlas N locomotives Mobile Decoder Drop in “A1” Atlas light board replacement decoder 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K0” form-factor boards 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma output