Electronics

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K0” form-factor boards 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma output

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K0” form-factor boards 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma output

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K0” form-factor boards 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma output

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K2” form-factor boards 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

Fits many older Atlas N locomotives Mobile Decoder Drop in “A0” Atlas light board replacement decoder 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K1” form-factor boards 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output Replaces both the DN163K1C & DN163K1D

Fits several Atlas N locomotives Mobile Decoder with SoundFX 8 Ohm 9x18x4 mm oval speaker 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

Fits many Atlas N locomotives Mobile Decoder with SoundFX 8 Ohm 9x18x4 mm oval speaker 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

The simpleway to program, read & reset DCC addresses!We've heard it time and timeagain from our customers. Programming DCC addresses is a hassle and only asmall percentage of hobbyists can actually perform this essential task.That's why we've...

This decoder is specifically designed as a replacement for HO-scale Bachmann "DCC Equipped" diesels. Providing a smooth, quiet operation. The decoder has 4 function outputs. Complete with 2 Golden Glow LEDs in the package

This 5 Amp starter set has everything you need to get DCC equipped trains up and running. It includes the user friendly Pro Cab. You can be up and running in less than 20 minutes. The PH5-R is a wireless equipped system. It is designed to...

Fits many HO locomotives Digitrax 9-Pin Harness Socket 1.0 Amp/2 Amps Peak 2 FX7 Functions, 200ma Output

Fits many HO locomotives Digitrax 9-Pin Harness Socket 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and PS-Harness 1.0 Amp/2 Amps Peak 2 FX7 Functions, 200ma Output

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and PS-Harness 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and P-Harness 1.0 Amp/2 Amps Peak 2 FX7 Functions, 200ma Output

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and P-Harness 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output

The Analog Filter 1 (AF1) is used to filter the DC signal leaving the power pack. This filter pack corrects flickering in lighting effects and low-speed auto-reversing. Only one AF1 is required to smooth out the operation of all of the locomotives being...

The WOW501 is a universal, 5 Amp sound decoder for large-scale locomotives. The WOW501 includes Keep Alive® on-board for stutter-free operation. Function 5 and 6 may be programmed to control a smoke unit with a coil and fan. By programming CV58...

The WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or locomotives which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The WOW101 is...