Electronics

0001325 Throttlepack Handheld 9900/9950 Instruction Manual

DCC Main Bus Wire, (Black), 14 AWG, 25 Feet NCE Multi Scale DCC Main Bus Wire Black 25'

Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin "Quick Plug" to improve performance over dirty track and switches.

The LokPilot 5 micro DCC Direct Kato USA has been specially developed for installation in N scale locomotives of the Kato USA brand. This decoder can be easily installed in most American diesel locomotives of this manufacturer instead...

This RGY LED is provided with four 24" long color coded #36 AWG wires. It may be fitted in place of a common T-1 LED with room to spare. The LED provides the three standard searchlight signal colors and is wired the same as a normal three light signal...

The DBX-9000 is a compact 9-wire connector and harness assembly for use with universal-style DCC decoders. It is designed to simplify the wiring connection between a steam locomotive and its tender, providing a quick-disconnect for...

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and PS-Harness 1.0 Amp/2 Amps Peak 2 FX7 Functions, 200ma Output

Decoder Buddy from Nix Trainz is a 21-pin-friendly replacement motherboard for the standard factory-supplied DCC 8-pin loco motherboard in many locomotives. It allows you to take full advantage of all the functions and features of the latest decoders...

This control provides the simplest way to wire and control tricky reverse loops, wyes, and turntables. It has reversing switches for two mainline cabs plus a switch, selectable by either cab, for directional control on reversing loops, and so on. Cab...

Thin cables Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we...

With the LokSound 5 Nano DCC, ESU has succeeded in developing an even smaller LokSound decoder! Thus, it should really be used in all vehicles of nominal sizes N and TT.   The LokSound 5 Nano DCC with E24 interface has a size of 19.6mm x 8.5mm...

Alligator clips are versatile, durable, and easy-to-use tools for establishing temporary electrical connections in electronics and DIY projects. Their hinged jaws make them widely applicable, including in airbrushing setups, where they can securely grip...

Build your control panels with greatly simplified wiring. Just connect push buttons to the Mini Panel and use to issue turnout routing macros, individual turnout commands by pushing one button. Set up is easy, just plug in a Pro Cab (sold separately) and...

DCC Mono Frog Juicer (polarity reverser for frogs)For all DCC systems including NCE PowerCab.  This board is an automatic polarity reverser for a single frog.  Setup is simple, connect two wires to the DCC bus and one wire to a frog.  The...

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and P-Harness 1.0 Amp/2 Amps Peak 2 FX7 Functions, 200ma Output

Fits many Atlas N locomotives Mobile Decoder with SoundFX 8 Ohm 9x18x4 mm oval speaker 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax Easy Connect 8 Pin Harness Motor 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB...

DCC Hex Frog Juicer - power 6 frogsFor DCC systems 2 Amps to 8 Amps including NCE PowerCab.  This board can be configured to use as an automatic polarity reverser for six frogs, or a reverser for one to three reversing loops, turntables, wyes,...

Ready to install in compatible locomotive motherboards 26.5mm X 15.5mm X 9mm Rated at 8 Ohm Rated at 1/2 Watt  

Package of four gaskets for mounting our 28mm round speakers (P.N. 810054).