Electronics

This full featured 5 Function,Direct Plug decoder is designed for Atlas Silver Series HO-Scale locomotives. This decoder will also fit many other engines including KATO and Athearn. Included is our auto-adjusting BEMF for outstanding slow speed...

The single input breakout board for the BDL168 block detection eliminates soldering connections to the card edge or card edge adapter of this product. This design has a single input, meaning all 4 detection zones (and all 16 sections) are connected to a...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. PX112-2 Plug ‘N Play Install on DH126 & DH166 Series Decoders PX Body Size 1...

The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any...

N Scale N14K2 Drop-In Control Only Decoder. Includes pre-soldered motor clips.

Set of 8 CT (Current Transformer) coils for BOD-8. These 100:1 toroid coils sense the track current on leads passing through the hole in the middle of the coil. They connect to the BOD-8 with twisted pair cable such as CAT-3 or CAT-5 network cable. (up...

16 Led drivers plus 8 line Input/Output node for NMRA CAN bus LCC®. Logic level I/O port compatible with other standard RR-CirKits I/O modules. Boot Loader for user installable firmware upgrades.  Includes powerful internal Logic Elements...

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

Fits many 21MT equipped HO locomotives Digitrax 21-pin MT socket 1.0 Amp/2 Amps Peak 2 FX7 Functions, 300ma Output

 Digitrax 9 pin to DCC medium plug short harness (1”)

Fits Intermountain N scale SD40T-2 / SD45T-2 6 FX3 Functions 3.5” x .367” x .135” w/ LED88.9mm x 9.32mm x 3.42 mm Replaces DN163I0   ▪FX3 Function outputs for prototypical lighting effects and on/off...

Wire color: red, orange and brown. Includes 1- Spool--Hook-Up Wire (3 Conductor). Number of Feet (12') (3.6m).

Adds a program track output to the PowerCab. Prevents accidental programming of locos on your mainline track when using Program Track mode. Automatically disconnects your main line when in Program Track mode. Does not affect OPS mode programming /...

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

The T4X is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The T4X may be used in locomotives which have ditch lights in addition to forward and reverse headlights. Note: As...

This full featured, 2 function, Direct Plug decoder is designed to easily plug into a vast array of locomotives with 8Pin NMRA Sockets. The 8-Pin NMRA plug built directly into this decoder make installation a snap. Included is our auto-adjusting BEMF for...

This colored wire will make wiring your layout easier than ever! Twenty gauge stranded copper; 50' reel.

Fits Kato, Athearn Genesis, Stewart, other HO locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output