Electronics

Mobile Decoder Fits Next18 socket locomotives Plug-in Next18 connector Motor drive at connector capacity 6 FX3 Functions

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 10 pin sound harnesses such as SDH166D &...

Fits several Atlas N locomotives Mobile Decoder with SoundFX 8 Ohm 9x18x4 mm oval speaker 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

With the LokSound 5 Nano DCC, ESU has succeeded in developing an even smaller LokSound decoder! Thus, it should really be used in all vehicles of nominal sizes N and TT.   The LokSound 5 Nano DCC with E24 interface has a size of 19.6mm x 8.5mm...

Requires an MRC Prodigy Express2 or Prodigy Advance2 system. Works With ANY Brand Loco or DCC Decoder. Plug-N-Play Setup and Operation. Module acts as an interface between the two most popular smartphone apps: WiThrottle for iPhone®,...

This Breakout board allows easy solder free connections from up to 8 Quik-Link devices to 10 pin I/O cables using 3 wire servo style cables. Also compatible with Berrett Hill products.

 This set of four 8-pin connectors is designed to facilitate wiring in locomotives equipped with a DCC-ready socket.

Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze. We offer 11 colors to match the NMRA and SoundTraxx standards.

Our Blunami decoders will change the way you enjoy the model railroading hobby. They operate in DC, DCC, or wireless mode with the free Blunami App. The Blunami BLU-21PNEM8The BLU-21PNEM8 is a 1-amp Digital Sound Decoder with 8 function outputs. It is...

SKU: 1279 This full featured 4 function BEMF decoder is designed for the following Atlas N Scale engines: GP7, GP9, GP15, GP30, and GP35. Included is our auto-adjusting BEMF for outstanding slow speed performance and hassle free set up. Also includes...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

This full featured 6 function BEMF decoder fits the following Atlas HO Scale engines: S1, S2, S3, and S4. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor...

This medium sized oval WOWSpeaker is a perfect fit for many diesel locomotives with speaker enclosures built into the frame. Producing sounds with the clarity and volume of a much larger speaker these 35mm x 16mm speakers are perfect for diesel...

RJ12 cable with a length of 12 feet. For use with DCC systems such as Digitrax LocoNet.

Series 6 Features 2 FX3 Functions .418” x .621” x .107”10.63mm x 15.79mm x 2.72mm Fits MicroTrains Line SW1500 units

  For use with Digitrax Decoders Equipped with 2 pin PX socket or solder pad connections Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance Use on 10-18V Track Power Hold...

The ESU SignalPilot decoder is a multi-protocol decoder designed primarily for switching daylight signals. It has 16 outputs to which micro lamps or LEDs (with series resistors) can be connected directly. Because all outputs are designed as push/pull...

The LokPilot 5 micro DCC Direct Kato USA Widebody is the “twin” of the LokSound 5 micro DCC Direct Kato USA Widebody. With its dimensions of 47.5mm x 14.0mm x 4.5mm it  has been specially developed for installation in wide body N...

This board is normally used for block detection on three rail layouts. This version of the board includes internal current limiters. Useful anyplace that an external voltage needs to be monitored. (5V-20V AC-DC-DCC)