Electronics

The K5D7 is a N-scale drop-in decoder specifically designed to fit the Kato F40PH locomotive. This decoder includes onboard LED’s for the forward, reverse, and red marker lights. The red marker lights will operate automatically in the reverse...

This hardwire decoder is the smallest decoder with built in Keep-Alive™ that we produce. It will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). While physically larger than a...

The K0D8 is a N-scale drop-in decoder for Kato locomotives. Examples include the following: Kato: ALCO PA-1 E5A E6A E8A E9A See the Installation Pages for a full list of compatible engines! Note: The K0D8 line of decoders are available...

The T4 is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The on-board resistors on this decoder allow for LED installations without the need for external resistors for F0F,...

This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but...

This decoder is a T6 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a T-series decoder, but...

This full featured 6 function BEMF decoder fits the following Atlas HO Scale engines: S1, S2, S3, and S4. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor...

The K4-LK is a function-only lighting expansion board which has been designed to be installed into the KATO N-scale MP36PH. This board has three hookup wires - One RED Anode(+) wire (center) and two GREEN function wires(-). Simply solder the wires to...

The K4D6 is a N-scale drop-in decoder specifically designed to fit the Kato N-Scale MP36PH locomotive. This decoder is also commonly paired with the K4-LK lighting kit for the MP36PH. Note: The K4D6 does not have the copper...

The LL8 is a 8-function direct-plug decoder designed specifically to meet the needs of LifeLike/Proto 2000 models. The LL8 can quickly be swapped for the existing DC board in your model, making the installation process fast and simple. The LL8 has a...

The K0D8-D is a N-scale drop-in decoder for Kato B-unit locomotives. Examples include the following: Kato: PB-1 F3B F7B E9B See the installation pages for a full list of compatible engines! Note: The K0D8 line of decoders are available with...

The K0D8 is a N-scale drop-in decoder for Kato locomotives. Examples include the following: Kato: F3A F7A See the installation pages for a full list of compatible engines! Note: The K0D8 line of decoders are available with different lighting...

The IMFTB4 is a N-scale drop-in decoder which is specifically designed for InterMountain FTB locomotive.   Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet...

The IMFTA4 is a N-scale drop-in decoder which is specifically designed for InterMountain FTA locomotive. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor...

The IMFP4 is a N-scale drop-in decoder which is designed for InterMountain FPA-unit locomotives. Examples include the following: InterMountain: FP7A FP9A See the installation pages for a full list of compatible engines! NOTE: This version of the...

The IMF4 is a N-scale drop-in decoder which is designed for InterMountain F-unit locomotives. Examples include the following: InterMountain: F3A/B F7A/B F9B See the installation pages for a full list of compatible engines! NOTE: This version of...

The IMD4 is a N-scale drop-in decoder which is designed for InterMountain locomotives. Examples include the following: InterMountain: SD40T-2 SD45T-2 SD45-2 See the installation pages for a full list of compatible engines! Back EMF Load...

The K3D3 is a N-scale drop-in decoder designed specifically to fit the Kato N-Scale NW2 locomotive. Note: This decoder is very fragile due to its thickness and physical design. Special caution should be taken when installing to ensure the PCB is...

The K2D4 is a N-scale drop-in decoder designed for Kato and Walthers locomotives. Examples include the following: Kato: RS2/RSC2 SD80/SD90MAC Walthers: RS2 GP18 See the installation pages for a full list of compatible engines! Note: The K2D4...

The CN is a N-scale drop-in decoder for older Atlas, Kato, and Intermountain locomotives. Examples include the following: Atlas: GP7/GP9 Old Style GP30/GP35 Old Style SD35/SD50/SD60/SD60M B30-7/B40-8 GP38 GP40 DCC-Ready SD9...