Electronics

The CN is a N-scale drop-in decoder for older Atlas, Kato, and Intermountain locomotives. Examples include the following: Atlas: GP7/GP9 Old Style GP30/GP35 Old Style SD35/SD50/SD60/SD60M B30-7/B40-8 GP38 GP40 DCC-Ready SD9...

The VO-1000 is a N-scale drop-in decoder which is specifically designed for the Atlas VO-1000 locomotive. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor...

The MP-15N is a N-scale drop-in decoder which is designed for the Atlas MP-15 locomotive. See the installation pages for a full list of compatible engines! Back EMF Load Compensation: Provides superior slow speed control and high performance...

The ALD4 is a N-scale drop-in decoder for Atlas locomotives. Examples include the following: Atlas: SD50 SD60 See the installation pages for a full list of compatible engines! Back EMF Load Compensation: Provides superior slow speed...

The MC4 is a 4-function HO and N scale hard-wire decoder with a 7 pin JST socket. The MC4 is designed for use in locomotives where a T-series or M-Series decoder is too large, and more than 2 lighting functions are needed. The MC4 is great for use in...

The MC2 is a 2-function HO and N scale hard-wire decoder with a 7 pin JST socket. The MC2 is designed for use in locomotives where a T-series or M-Series decoder is too large. This decoder may be hard-wired, but is also available with 8-pin NMRA plugs...

The M4 is a small form factor hard-wire decoder with 4 lighting functions for HO and N scale installations. This decoder is designed for installations where space is limited. This decoder is also available with 8-pin NMRA plugs or Keep...

This function-only decoder is designed for any scale where extra lighting features and functions are needed. These decoders are commonly used for smoke coils, fireboxes, or step lights. Note: FL-series decoders do not provide motor control. A separate...

This function-only decoder is designed for any scale where extra lighting features and functions are needed. This decoder includes a 6-pin harness for easy installation and wiring. These decoders are commonly used for smoke coils. Note:...

The A6X is six function HO-scale "drop-in" style mobile decoder with integrated 1.5V power supply for Atlas, Athearn, Kato, etc. locomotives. Examples include the following: Athearn: F59PHI F3 Atlas: RS-1/RS-3/RS-11 C424 GP7 Kato: GP35 Back...

The T4X is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The T4X may be used in locomotives which have ditch lights in addition to forward and reverse headlights. Note: As...

Tortoise Card Edge Connector Our Edge Connector Now without shims redesigned for a SNUG fit for the updated tortoise switch machine. The newer tortoises have a green edge connector. See images. See ACL1000 to fit older switch machine

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot...

With its unique design LokSound 5 DCC Direct, with integrated PowerPack can easily replace boards that provide poor motor control, low volume, or generally inferior sound. Not only will the decoder work fine with most factory installed speakers, but it...

The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any...

For all HO Scale engines with 9 pin quick plug D13J decoder 10 pack - new smaller replacement for D13SRJ Direct plug equipped with NMRA 9 pin DCC “Quick Plug” and a 9 pin 8" harness is also included. Dimensions: 1.03 x 0.630 x .185 inches...

Plug and Play Universal fascia panel supporting LocoNet. Two RJ12 front panel Throttle jacks. Three RJ12 rear pass-through LocoNet jacks Supports throttle charging. Fully connectorized installation. 2mm rear plug for e.g. PS14 DC power supply. 4-pin...

Finally, a Model Railroading Video Camera that fits neatly inside your engines (HO or larger) and rolling stock — powered by DCC/DC track power.   Climb into the Cab with a Choo Choo Vision Model Railroad CAB-CAM.  View your layout in...

Finally, a Model Railroading Video Camera that fits neatly inside your engines (HO or larger) and rolling stock — powered by DCC/DC track power.   Climb into the Cab with a Choo Choo Vision Model Railroad CAB-CAM.  View your layout in...

Finally… a camera for N-Scale!! Climb into the Cab and experience your layout with a Choo Choo Vision Model Railroad CAB-CAM.  View your layout in real-time from the Engineer’s point-of-view — A realistic and immersive experience...