Electronics

Speakers for model trains

Speakers for model trains

Speakers for model trains

Speakers for model trains

A 1 foot (60in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

A 7 foot (84in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

A 10 foot (120in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

Jackson Railcar WC1001 - Nylon spade connector blue (female) 20 Per Package

Jackson Railcar WC1004 - Nylon spade connector yellow (male) 10 Per Package

Jackson Railcar WC1005 - Nylon spade connector yellow (female) 10 Per Package

This switched mode power pack is for connecting to and for powering the 60216, 60226, as well as 60214/60215 Central Stations, and the 60174 and 60175 Boosters. The input is 120 volts / 60 Hertz, and the output is 19 volts / 100 watts DC voltage...

Note: The 60114 or 60112 (1 Gauge) or the 60116 or 60113 (H0) Connector Box is required to connect the Mobile Station. Highlights Simple, easy operation. Background-lighted graphic display with self-explanatory pictograms. Up to 32...

Highlights Easy operation familiar from the MS2 without looking at it. Single-hand operation with the handle (Pop Socket) included with this controller on the back of the latter. New tactile control knob for even easier handling. Backlit...

ESU 50322 Speaker Monacor Sp6/4SQ, 59mm Round 8 Ohms, for PIKO G/LGB Loks 59mm Round 8 ohm 1-2 Watts for PIKO G/LGB Loks The speaker is specifically selected for use with the LokSound XL decoder. Additionally, the speaker is suitable...

These units provide a direct plug-in to Athearn and other locos equipped with NMRA 8 pin DCC and include Silent Running torque-compensated motor drive for ultra smooth low speed performance. Motor rating 3/4 Amp continuous, 1.2 Amp stall. All four...

(Fan Out Board, Dual Direct) This board is specifically designed to terminate the dual cable, eight stall motor, connections from a single SMD-8 board. It includes on board jumpers to select common positive or common negative for optional single ended...

Bit level repeater connects two LCC ® CAN bus segments. Quad RJ45 connectors for dual LCC ® CAN bus loop through connections. Includes a CAN bus data monitor LED for network trouble shooting. 2 LED display. Small package size. Just 2-1/2" x 3-1/2" x 1"...

Package of four gaskets for mounting our 20mm round speakers (P.N. 810053).

Package of four gaskets for mounting our 40 x 20mm oval speakers (P.N. 810103).

Package of four gaskets for mounting our 40 x 28.5mm oval speakers (P.N. 810078).